TS-453D does not boot up

Printers, HDDs, USB/eSATA drives, 3rd-party programs
Post Reply
matt86
Starting out
Posts: 10
Joined: Sat Jun 04, 2022 2:02 pm

TS-453D does not boot up

Post by matt86 »

Occasionally when I power on my NAS from the power button, it is very silent because nothing seems to power up. The fan does not start and neither the disks. Only the power and disks LEDs light up and it stays like that forever. Then I would have to pull the power cable from the NAS and put it back in to power up normally.

NAS Model: TS-453D (4G RAM)
OS version: 5.0.0.1986
Network: single port
Disks: 2 WD RED Plus 6Gb (WD60EFZX)
matt86
Starting out
Posts: 10
Joined: Sat Jun 04, 2022 2:02 pm

Re: TS-453D does not boot up

Post by matt86 »

I highly doubt that one of the HDs is dying since I've only owned the NAS for about 6 months. Still, I will try removing the HDs and see what happens. Thanks.
matt86
Starting out
Posts: 10
Joined: Sat Jun 04, 2022 2:02 pm

Re: TS-453D does not boot up

Post by matt86 »

No not necessarily. It starts and shuts down by the in built scheduler.
matt86
Starting out
Posts: 10
Joined: Sat Jun 04, 2022 2:02 pm

Re: TS-453D does not boot up

Post by matt86 »

@PaulAtreidis I misunderstood your previous question, I thought it was a question for myself. Yes you are right NAS are designed to run 24/7 but since I don't use it during the night, I turn it of and on by the scheduler.

Update: I removed the disks and turned the NAS on and off about 7 times and it doesn't seem to the same thing without disks. So, it might be related to the disks. But then again, the disks health is all good.
matt86
Starting out
Posts: 10
Joined: Sat Jun 04, 2022 2:02 pm

Re: TS-453D does not boot up

Post by matt86 »

No modifications.
FSC830
Experience counts
Posts: 2043
Joined: Thu Mar 03, 2016 1:11 am

Re: TS-453D does not boot up

Post by FSC830 »

Strange of course, may be an issue with power supply? But if so, why does the issue occurs only ocassionally?
Or does a damaged disk consumes to much power? But also: why only occasionally...?
A six month old NAS? Not sure, if Intel clock bug is to consider here.

Regards
matt86
Starting out
Posts: 10
Joined: Sat Jun 04, 2022 2:02 pm

Re: TS-453D does not boot up

Post by matt86 »

Did it again today :?

Any suggestions?

Thanks
User avatar
qrusher
Know my way around
Posts: 143
Joined: Thu Mar 15, 2018 9:51 pm
Location: R/U/serious
Contact:

Re: TS-453D does not boot up

Post by qrusher »

swap ram to orig moduls if u change tham
replug 3v battery on mb
crush qnaps like a thanos crushing planets
Updates are compromise between old bug patches and new bugs introduced. 8)
do you backup..then kill it with fire
stuff:mikrotik Crs309-1g-8s+in & s+rj10 x4
rost69
First post
Posts: 1
Joined: Sun Mar 19, 2023 10:41 pm

Re: TS-453D does not boot up

Post by rost69 »

Hello,
I have the same issue with my TS-453D with 32GB ram (Kingston recomended for this model 2x KVR26S19D8/16).
Have you finally found a solution for this?
diwiwi
Easy as a breeze
Posts: 400
Joined: Mon Apr 29, 2019 3:21 pm
Location: Paris, France

Re: TS-453D does not boot up

Post by diwiwi »

rost69 wrote: Sun Mar 19, 2023 10:54 pm I have the same issue with my TS-453D with 32GB ram (Kingston recomended for this model 2x KVR26S19D8/16).
Official max supported RAM memory on this model is 8 GB. https://www.qnap.com/en/product/ts-453d/specs/hardware
Try with the original modules..

-
matt86
Starting out
Posts: 10
Joined: Sat Jun 04, 2022 2:02 pm

Re: TS-453D does not boot up

Post by matt86 »

rost69 wrote: Sun Mar 19, 2023 10:54 pm Hello,
I have the same issue with my TS-453D with 32GB ram (Kingston recomended for this model 2x KVR26S19D8/16).
Have you finally found a solution for this?
Unfortunately no solutions yet. Have you found anything yourself?
matt86
Starting out
Posts: 10
Joined: Sat Jun 04, 2022 2:02 pm

Re: TS-453D does not boot up

Post by matt86 »

matt86 wrote: Mon Jul 17, 2023 4:42 pm
rost69 wrote: Sun Mar 19, 2023 10:54 pm Hello,
I have the same issue with my TS-453D with 32GB ram (Kingston recomended for this model 2x KVR26S19D8/16).
Have you finally found a solution for this?
Unfortunately no solutions yet. Have you found anything yourself?
Unfortunately no solution yet :(
Post Reply

Return to “Hardware & Software Compatibility”