integrating QNAP with CINDER
Posted: Wed Jun 28, 2017 2:36 am
Hi All,
If this is not the right forum for this question, please feel free to move this to the right forum.
What we have now is TDS-16489U , which we are trying to integrate with Openstack.
Openstack is installed using OSA ( https://github.com/openstack/openstack-ansible )
If I look into the driver:
https://raw.githubusercontent.com/opens ... rs/qnap.py
it needs this
required_config = ['qnap_management_url',
'san_login',
'san_password',
'qnap_poolname',
'qnap_storage_protocol']
The way to configure CINDER is listed in this page:
https://docs.openstack.org/developer/op ... os_cinder/ but it does not have QNAP specific values.
If someone can guide me on what values to provide to cinder, or give a basic configuration, that would help.
Thanks,
Shashi
If this is not the right forum for this question, please feel free to move this to the right forum.
What we have now is TDS-16489U , which we are trying to integrate with Openstack.
Openstack is installed using OSA ( https://github.com/openstack/openstack-ansible )
If I look into the driver:
https://raw.githubusercontent.com/opens ... rs/qnap.py
it needs this
required_config = ['qnap_management_url',
'san_login',
'san_password',
'qnap_poolname',
'qnap_storage_protocol']
The way to configure CINDER is listed in this page:
https://docs.openstack.org/developer/op ... os_cinder/ but it does not have QNAP specific values.
If someone can guide me on what values to provide to cinder, or give a basic configuration, that would help.
Thanks,
Shashi