Page 3 of 3

Re: QNAP RAM Recommendations

Posted: Thu Jun 27, 2019 11:26 pm
by CpX
@Trexx, I want to upgrade my Ryzen nas with ram, and wanted to buy the same ones you had. But where I live, they are called red, black and white kingston fury Hyper X.

I'm unsure what the difference is, can you help?

HyperX Fury Black DDR4 2666MHz 2x16GB (HX426C16FBK2/32)
HyperX Fury White DDR4 2666MHz 2x16GB (HX426C16FWK2/32)
HyperX Fury Red DDR4 2666MHz 2x16GB (HX426C16FRK2/32)

Also, did the NAS perform better with more ram, its said that Ryzen excels with more ram.

Re: QNAP RAM Recommendations

Posted: Thu Jun 27, 2019 11:53 pm
by Moogle Stiltzkin
CpX wrote:
Thu Jun 27, 2019 11:26 pm
@Trexx, I want to upgrade my Ryzen nas with ram, and wanted to buy the same ones you had. But where I live, they are called red, black and white kingston fury Hyper X.

I'm unsure what the difference is, can you help?

HyperX Fury Black DDR4 2666MHz 2x16GB (HX426C16FBK2/32)
HyperX Fury White DDR4 2666MHz 2x16GB (HX426C16FWK2/32)
HyperX Fury Red DDR4 2666MHz 2x16GB (HX426C16FRK2/32)

Also, did the NAS perform better with more ram, its said that Ryzen excels with more ram.
trex uses the hyperx fury black 16gx2 dual KIT variant. specifically
Trexx wrote:
Fri May 31, 2019 10:20 am
Here is what I put in mine for the Kingston HyperX part #
HX426C16FBK2/32
https://www.amazon.com/Kingston-Technol ... B06XKSPW5V

Stay with the 2666 speed (or even slightly faster if cheaper).

I initially went for the hyperx fury black 16gb (8gb x 2). Unfortunately these were the non kit.... they booted up fine, with uptime for a couple of hours, but i later then had a random reboot. i unfortunately did not do a memtest86 or try it on downgraded qts 4.3.6 as i probably prematurely returned it for a replacement, thinking the issue was incompatible ram. Now i suspect the issue wasn't the ram compatibility, but something on QTS 4.4.1 that caused the random reboot (because using my original ram after downgrading to 4.3.6, i no longer had random reboots). But i didn't do the test so i don't know for sure in regards to the hyperx ram compatibility i installed.


For me i'm using 2x8gb (16gb total) crucial (non kit :( )
Crucial 8GB DDR4-2666 UDIMM
CT8G4DFS8266

Seems to work fine. although i would recommend going for DUAL kits for better compatibility.
viewtopic.php?f=25&t=148952&start=15#p718823


On the crucial and Kingston websites there is a validation/compatibility list for TS-877. I'm not sure for other ram, but at least those 2 for this particular model have a validation list.

Re: QNAP RAM Recommendations

Posted: Thu Jul 11, 2019 12:45 am
by CpX
@Trexx, any reason you dont use stock ram (8gb) with your black fury set of 32gbs?

Re: QNAP RAM Recommendations

Posted: Thu Jul 11, 2019 4:55 am
by Trexx
Because I just updated this week to 64GB (4x16GB)


Sent from my iPhone using Tapatalk

Re: QNAP RAM Recommendations

Posted: Thu Jul 11, 2019 5:00 am
by Trexx
CpX wrote:@Trexx, I want to upgrade my Ryzen nas with ram, and wanted to buy the same ones you had. But where I live, they are called red, black and white kingston fury Hyper X.

I'm unsure what the difference is, can you help?

HyperX Fury Black DDR4 2666MHz 2x16GB (HX426C16FBK2/32)
HyperX Fury White DDR4 2666MHz 2x16GB (HX426C16FWK2/32)
HyperX Fury Red DDR4 2666MHz 2x16GB (HX426C16FRK2/32)

Also, did the NAS perform better with more ram, its said that Ryzen excels with more ram.
Sorry for the late reply. Here is what I ordered.


https://www.amazon.com/gp/aw/d/B06XKSPW5V

As for black vs red etc. makes no difference is just the color of the heatsinks.


Sent from my iPhone using Tapatalk

Re: QNAP RAM Recommendations

Posted: Thu Jul 11, 2019 6:48 pm
by CpX
Thanks, i'm waiting for upgrading with the next 32gb chunk, so in the meantime I thought about putting in the other 8. Unsure if the difference in ram will make an issue.

¨Congratulations on the upgrade!

Re: QNAP RAM Recommendations

Posted: Thu Aug 08, 2019 7:44 am
by MrCaringi
Hola masters,

@Trexx what is your RAM recomendation for a TS-673?

Thanks in advance,

Re: QNAP RAM Recommendations

Posted: Tue Aug 13, 2019 11:07 pm
by melgaard
Just to add to more experience...

Just successfully installed a 32GB Corsair Vengance LPX kit (2x16GB 2666 MHz) in my TVS-1282-i5-16G together with the original 16GB (2x8), no issues detected so far - Dual channel on and all.
Now it's only been running for 5 hours so it's a bit early to conclude anything, but so far so good.

Kit Serial: CMK32GX4M2A2666C16