RAM for Qnap 251B

Printers, HDDs, USB/eSATA drives, 3rd-party programs
Post Reply
John Kri
New here
Posts: 3
Joined: Sat Aug 31, 2019 9:14 pm

RAM for Qnap 251B

Post by John Kri » Sat Aug 31, 2019 9:38 pm

Hi Guys

Sorry if this is topic is old and repost but I couldn't find any info on this board.

I just got a new Qnap TS 251B with 2G RAM, I would like to upgrade to 8G and therefore need 2x4G RAM modules, any advice on what to buy?

Thanks in advance

User avatar
spikemixture
Been there, done that
Posts: 682
Joined: Wed Mar 07, 2018 11:04 pm
Location: 3rd World

Re: RAM for Qnap 251B

Post by spikemixture » Sat Aug 31, 2019 10:30 pm

John Kri wrote:
Sat Aug 31, 2019 9:38 pm
Hi Guys

Sorry if this is topic is old and repost but I couldn't find any info on this board.

I just got a new Qnap TS 251B with 2G RAM, I would like to upgrade to 8G and therefore need 2x4G RAM modules, any advice on what to buy?

Thanks in advance
You will get answers to check the recommended Qnap ram.

I do hope you get other answers quicker than me
I have been waiting for an answer to similar question for awhile.
Qnap TS-1277 1700 - 6x8TB WD White, 2x8TB WD Red - Raid 5
Qnap TVS-1282 - 8x10TB WD White - Raid 6
Synology -1817+ - 2x10,2x8,2x6 (Ironwolf) 2x6 WD Red - SHR
Drobo 5n - 3x2TB WD Green, 2x3TB WD Red - Drobo Raid
Buffalo LinkStation - 2x2TB WD
ProBox 8 Bay USB3 - 8x4TB Seagate - JBOD
All software is updated as soon as it's available.
I give my opinion from my experience i.e. I have (or had) that piece of equipment/software and used it! :roll:

User avatar
Toxic17
Ask me anything
Posts: 5107
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: RAM for Qnap 251B

Post by Toxic17 » Sat Aug 31, 2019 11:56 pm

If there are not definitive search results on the forums from other users, you need to identify the RAM module you have at present. then match the spec with a good vendor.

here is a breakdown review that mentions what ram they had at time of review.

https://aphnetworks.com/reviews/qnap-ts-251b/3
Our NAS came with 1x4GB of ADATA DDR3L-1866 double sided SODIMM using Micron D9SGQ ICs.
if yours is the same, then check out compatible ram modules for that spec. Crucial are fairly well made and usually come with a lifetime guarantee and do most SODIMMs, but you will need to search yourself or you buy the hyper expensive QNAP ram from the qnap store https://shop.qnap.com/index.php?route=p ... uct_id=220.

However if you source a similar spec SODIMM from say amazon, you are at least able return the ram if its not compatible.
Regards Simon

QTS 4.x User Guidex

QNAP Club Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


NAS: TS-473-32GB QM2-2P QXG-10G1T 4.3.6.0993 • TVS-463-16GB 4.3.6.0993 QM2-2S10G1TB • TS-459 Pro 2GB 4.2.6 • TS-121 4.3.3.0998 • APC Back-UPS ES 700G •
QPKG's: TwonkyServer 8.51 • Apache73 • QSonarr 3.0.1.503 • QNBZGet 21.0 • phpMyAdmin 4.9.0.1 • Qmono 5.20.1.19 • McAfee 2.2.1 • Lychee 3.2.15 • HBS 3.0.190802 • LEgo v3.0.0
Network: VM Hub 3.0 <500/35> • UniFi USG Pro 4 • UniFi USW-16-150W • UniFi USW-8-60W • UniFi CloudKey Gen2+• UniFi G3-Flex • UAP AC Pro • UAP AC Lite • SLM2008 • Dell 7050 MFF •

John Kri
New here
Posts: 3
Joined: Sat Aug 31, 2019 9:14 pm

Re: RAM for Qnap 251B

Post by John Kri » Sun Sep 01, 2019 3:18 pm

Thanks, I tried Google it, and found some of these, https://www.licotronic.com/kingston-4gb ... c/p8011104

Looks like they will fit the bill

Thanks again

John Kri
New here
Posts: 3
Joined: Sat Aug 31, 2019 9:14 pm

Re: RAM for Qnap 251B

Post by John Kri » Mon Sep 09, 2019 10:13 pm

If anyone should be interested, these RAM works perfectly :-)

Post Reply

Return to “Hardware & Software Compatibility”