Afternoon all,
I am looking to max out the RAM on my newly acquired Qnap TVS-H1688X. I see the RAM from QNAP but it is quite expensive. Does anyone know if RAM from Crucial, Corsair or Kingston would work? I am new to the higher end NAS machines so want to make sure I am purchasing something that will work. If you have any suggestions for 32GB modules I would greatly appreciate it.
AM
RAM Upgrade Qnap TVS-H1688X
-
- Starting out
- Posts: 31
- Joined: Fri Jan 08, 2021 3:16 am
Re: RAM Upgrade Qnap TVS-H1688X
I have the same unit and upgraded to 96GB by adding Kingston KSM32ED8/32ME. The unit came with Kingston KSM32ED8/16ME. Everything works fine.
-
- Starting out
- Posts: 14
- Joined: Tue Apr 20, 2021 5:32 pm
- Location: FRANCE
Re: RAM Upgrade Qnap TVS-H1688X
Hi all,
So it is possible to add different memory size stick. A Qnap presales engineer tell me that it is not possible.
So it is possible to add different memory size stick. A Qnap presales engineer tell me that it is not possible.
Thank you for sharing
TVS-h1288X - RAM: 64G - V 4.5.5.1892
2 x NVME - SSD 970 EVO Plus 2TB (RAID 0)
4 x SATA - SSD 870 EVO 2TB (RAID 5)
2 x SATA - SSD 840 EVO 1TB (RAID 1)
1 x SATA - SSD 860 PRO 2 TB
2 x SATA - HD ST16000NM001G-2KK103 16TB (RAID 1)
2 x SATA - HD WD40EFRX-68N32N0 4TB (RAID 1)
1 x SATA - HD WD40PURX-78NZ6Y0 4TO
TVS-h1288X - RAM: 64G - V 4.5.5.1892
2 x NVME - SSD 970 EVO Plus 2TB (RAID 0)
4 x SATA - SSD 870 EVO 2TB (RAID 5)
2 x SATA - SSD 840 EVO 1TB (RAID 1)
1 x SATA - SSD 860 PRO 2 TB
2 x SATA - HD ST16000NM001G-2KK103 16TB (RAID 1)
2 x SATA - HD WD40EFRX-68N32N0 4TB (RAID 1)
1 x SATA - HD WD40PURX-78NZ6Y0 4TO
-
- First post
- Posts: 1
- Joined: Sat Jul 04, 2015 11:13 pm
Re: RAM Upgrade Qnap TVS-H1688X
"So it is possible to add different memory size stick. A Qnap presales engineer tell me that it is not possible."
There are four slots available, as long as you you have two identical pairs, you are OK.
There are four slots available, as long as you you have two identical pairs, you are OK.
-
- New here
- Posts: 5
- Joined: Fri Nov 30, 2018 2:11 am
Re: RAM Upgrade Qnap TVS-H1688X
I've been trying to use the Crucial MTA18ASF4G72AZ-3G2R (referred via the Crucial site: https://www.crucial.com/compatible-upgr ... tvs-h1288x).
DDR4-3200MT/s • 32GB Module Capacity • 16Gb Die Density • ECC UDIMM • 2 Rank x 8 • PC4-25600 • CL=22 • Ext Timing 22-22-22 • 1.2V • ECC • Single
- Each 32GB stick boots fine if I put it in alone
- When I put in 2 x 32GB or 4 x 32GB, the system hangs on "Booting / Starting system" for a very long time--I gave up after half an hour.
When I put the original 2 x 16GB back in, it boots fine.
DDR4-3200MT/s • 32GB Module Capacity • 16Gb Die Density • ECC UDIMM • 2 Rank x 8 • PC4-25600 • CL=22 • Ext Timing 22-22-22 • 1.2V • ECC • Single
- Each 32GB stick boots fine if I put it in alone
- When I put in 2 x 32GB or 4 x 32GB, the system hangs on "Booting / Starting system" for a very long time--I gave up after half an hour.
When I put the original 2 x 16GB back in, it boots fine.
Last edited by echeng on Tue Oct 24, 2023 6:21 am, edited 1 time in total.
- dolbyman
- Guru
- Posts: 35273
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: RAM Upgrade Qnap TVS-H1688X
I run two KSM32ED8/16MR in conjunction with the 2X8GB that came with the NAS (48GB together), no problem (1288x)