Hello.
I have a Qnap nas with 8 hard drives in a raid 5 array. One of my hard drives has been detected as faulty and so I am hoping to swap it out.
I remember when I set this raid array up I read that I would need exactly the same drives or it wouldn’t work.
I have 8 x wdc wd40efrx-68n32n082.0 4Tbyte
Question: To swap out the drive, does the whole serial number need to be identical (including the -68n32n082.0 part)? Is there any latitude in the exactness of the drives?
Note: I set this up a few years back now and am not someone who visits this often. Only now that a drive needs replacing am I revisiting this. Therefore I’m pretty much a novice.
Any help will be greatly appreciated.
Failing hard drive
- dolbyman
- Guru
- Posts: 35248
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Failing hard drive
no such requirement exists
hotswap the faulty drive with any nas rated drive of equal or larger size
hotswap the faulty drive with any nas rated drive of equal or larger size