I tried: upgraded ram to 8 gb and installed plex: the same result.
I also tried to copy another movie...and it's perfect!!!!!
that's very strange at all...cannot understand
memory and ssd upgrade HS453DX
-
- Starting out
- Posts: 27
- Joined: Mon Jun 30, 2014 10:49 pm
- dolbyman
- Guru
- Posts: 35248
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: memory and ssd upgrade HS453DX
was that direct play or transcoded?
if direct play, then the codec might just not work right with the TV's hardware decoder
you could always get a external player android/appletv/etc and use that
if direct play, then the codec might just not work right with the TV's hardware decoder
you could always get a external player android/appletv/etc and use that
-
- Starting out
- Posts: 27
- Joined: Mon Jun 30, 2014 10:49 pm
Re: memory and ssd upgrade HS453DX
I think I got the solution: the audio files into the mkv are bad encoded, and so even the tv and the amplifier are hard to decode
-
- New here
- Posts: 5
- Joined: Sat Feb 29, 2020 4:15 am
Re: memory and ssd upgrade HS453DX
You have to enable ssh service on your QNAP. Using win 10 pc you need to run ssh client app like Putty.... By default qnap systems only allow ssh access to admin user. But you can change ssh user permissions on Control Panel/Network & File Services/Telnet/SSH, anc clicking the button named "Edit Access Permission".Arrowy wrote: ↑Tue Jun 01, 2021 6:09 pmHello kicritos,kicritos wrote: ↑Wed May 26, 2021 5:15 am Althought Intel specifies in their web page that Celeron J4115 supports up to 8GB (4GBx2) and QNAP advertises HS-453DX up to 8GB too. You can check your DRAM capabilities using dmidecode tool
look atCode: Select all
$ dmidecode Handle 0x0023, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity:32 GB Error Information Handle: Not Provided Number Of Devices: 2
Maximum Capacity: 32 GB
Currently i have installed Samsung M471A2K43EB1-CTD (16GBx2) Working like a charm.Code: Select all
$ free total used free shared buffers cached Mem: 32786224 14421736 18364488 443112 1438760 7683232 -/+ buffers/cache: 5299744 27486480 Swap: 32826160 0 32826160
I know it could be off topic but could you please help me to do the same thing on my 332x ( Arm cpu)
I access the console management but then how can I run dmidecode from a win 10 pc?
I see only 7 options and Q for quit.
Thanks for your answer
I know it cou
Once inside ssh shell you can run dmidecode command
QTS 4.4.1
HS-553DX
HS-553DX
-
- Starting out
- Posts: 11
- Joined: Mon Oct 14, 2019 2:39 pm
Re: memory and ssd upgrade HS453DX
I tried to install 2x8GB RAM ( Crucial CT8G4SFS824A C8FP, 8GB DDR4-2400 SODIMM 1,2V CL17 ) and the system does not want to start at all. I just hangs with red LEDs at Crucial SATA.2 SSD on.
Going back to 2x2GB makes it work again.
Anybody had such a problem?
According to kicritos the memory spec is right.
Is there anything else to do except replacing memory modules in the system?
HS-453DX
Going back to 2x2GB makes it work again.
Anybody had such a problem?
According to kicritos the memory spec is right.
Is there anything else to do except replacing memory modules in the system?
HS-453DX