memory and ssd upgrade HS453DX

Printers, HDDs, USB/eSATA drives, 3rd-party programs
thespacecat
Starting out
Posts: 27
Joined: Mon Jun 30, 2014 10:49 pm

Re: memory and ssd upgrade HS453DX

Post by thespacecat »

I tried: upgraded ram to 8 gb and installed plex: the same result.
I also tried to copy another movie...and it's perfect!!!!!

that's very strange at all...cannot understand
User avatar
dolbyman
Guru
Posts: 35024
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: memory and ssd upgrade HS453DX

Post by dolbyman »

was that direct play or transcoded?

if direct play, then the codec might just not work right with the TV's hardware decoder

you could always get a external player android/appletv/etc and use that
thespacecat
Starting out
Posts: 27
Joined: Mon Jun 30, 2014 10:49 pm

Re: memory and ssd upgrade HS453DX

Post by thespacecat »

I think I got the solution: the audio files into the mkv are bad encoded, and so even the tv and the amplifier are hard to decode
kicritos
New here
Posts: 5
Joined: Sat Feb 29, 2020 4:15 am

Re: memory and ssd upgrade HS453DX

Post by kicritos »

Arrowy wrote: Tue Jun 01, 2021 6:09 pm
kicritos wrote: Wed May 26, 2021 5:15 am Althought Intel specifies in their web page that Celeron J4115 supports up to 8GB (4GBx2) and QNAP advertises HS-453DX up to 8GB too. You can check your DRAM capabilities using dmidecode tool

Code: Select all

$ dmidecode

Handle 0x0023, DMI type 16, 23 bytes
Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: None
        Maximum Capacity:32 GB
        Error Information Handle: Not Provided
        Number Of Devices: 2
look at
Maximum Capacity: 32 GB

Currently i have installed Samsung M471A2K43EB1-CTD (16GBx2) :twisted: Working like a charm.

Code: Select all

$ free   
             total       used       free     shared    buffers     cached
Mem:      32786224   14421736   18364488     443112    1438760    7683232
-/+ buffers/cache:    5299744   27486480
Swap:     32826160          0   32826160
Hello kicritos,
I know it could be off topic but could you please help me to do the same thing on my 332x ( Arm cpu)
I access the console management but then how can I run dmidecode from a win 10 pc?
I see only 7 options and Q for quit.
Thanks for your answer

I know it cou
You have to enable ssh service on your QNAP. Using win 10 pc you need to run ssh client app like Putty.... By default qnap systems only allow ssh access to admin user. But you can change ssh user permissions on Control Panel/Network & File Services/Telnet/SSH, anc clicking the button named "Edit Access Permission".

Once inside ssh shell you can run dmidecode command
QTS 4.4.1
HS-553DX
KonradM
Starting out
Posts: 11
Joined: Mon Oct 14, 2019 2:39 pm

Re: memory and ssd upgrade HS453DX

Post by KonradM »

I tried to install 2x8GB RAM ( Crucial CT8G4SFS824A C8FP, 8GB DDR4-2400 SODIMM 1,2V CL17 ) and the system does not want to start at all. I just hangs with red LEDs at Crucial SATA.2 SSD on.
Going back to 2x2GB makes it work again.

Anybody had such a problem?

According to kicritos the memory spec is right.

Is there anything else to do except replacing memory modules in the system?

HS-453DX
Post Reply

Return to “Hardware & Software Compatibility”