DDR4 ECC compatibility

Printers, HDDs, USB/eSATA drives, 3rd-party programs
Post Reply
AntonioManuel
Getting the hang of things
Posts: 63
Joined: Thu Jul 13, 2017 8:55 am

DDR4 ECC compatibility

Post by AntonioManuel »

Hello, can anyone tell me if any of the DDR4 ECC available, like in the next link's in the message, is compatible with QNAP TVS-672XT?

32GB DDR4 PC4-21300 2666Mhz 260-pin SODIMM ECC Unbuffered Memory RAM

Kingston 32GB DDR4-2666MHZ ECC CL19 SODIMM 2RX8 MICRON E

Thanks,
Thanks.

TVS-672XT
QTS 5.0.1.2145
AntonioManuel
Getting the hang of things
Posts: 63
Joined: Thu Jul 13, 2017 8:55 am

Re: DDR4 ECC compatibility

Post by AntonioManuel »

Anyone try it?
Thanks.

TVS-672XT
QTS 5.0.1.2145
AntonioManuel
Getting the hang of things
Posts: 63
Joined: Thu Jul 13, 2017 8:55 am

Re: DDR4 ECC compatibility

Post by AntonioManuel »

I was thinking putting ECC memory's.
Thanks.

TVS-672XT
QTS 5.0.1.2145
User avatar
Don
Guru
Posts: 12289
Joined: Thu Jan 03, 2008 4:56 am
Location: Long Island, New York

Re: DDR4 ECC compatibility

Post by Don »

Specs for this unit say nothing about supporting ECC. Also the memory in the QNAP store for the unit is also non-ECC. So I would say the unit does not support ECC.
Use the forum search feature before posting.

Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.

NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
AntonioManuel
Getting the hang of things
Posts: 63
Joined: Thu Jul 13, 2017 8:55 am

Re: DDR4 ECC compatibility

Post by AntonioManuel »

Hello, theoretically it supports ECC when looking at CPU spec sheet. Qnap themselves have not mentioned compatibility with ECC.
https://ark.intel.com/content/www/us/en ... 0-ghz.html

Thanks,
Thanks.

TVS-672XT
QTS 5.0.1.2145
Post Reply

Return to “Hardware & Software Compatibility”