Hi,
after I tried to upgrade memory my NAS is stuck in "hardware up initialization..". I also tried to revert the RAM to the original one, but without success.
Any further hints? How to connect a monitor?
Regards,
Jonas
QNAP TVS-472xt stuck in: hardware up initialization...
-
- New here
- Posts: 2
- Joined: Sun Aug 29, 2021 9:22 pm
- dolbyman
- Guru
- Posts: 35024
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TVS-472xt stuck in: hardware up initialization...
You might have ESD fried your NAS ..were you securely grounded?
A monitor would be connected via HDMI ..straight forward
A monitor would be connected via HDMI ..straight forward
- dolbyman
- Guru
- Posts: 35024
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TVS-472xt stuck in: hardware up initialization...
As you also postet in the German Forum..yes the sudden death syndrom of your NAS could also come into play
-
- New here
- Posts: 2
- Joined: Sun Aug 29, 2021 9:22 pm
Re: QNAP TVS-472xt stuck in: hardware up initialization...
This time I forgot about ESD, not grounded, no. Just touched the QNAP case before to ground myself a bit.
HDMI did not get any signal. Should it work at this stage of booting?
HDMI did not get any signal. Should it work at this stage of booting?
- dolbyman
- Guru
- Posts: 35024
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TVS-472xt stuck in: hardware up initialization...
something should happen at least..try bashing f2 or f12 to get into bios