Correct model HDD for TS-809U

Printers, HDDs, USB/eSATA drives, 3rd-party programs
Post Reply
MikeyE
New here
Posts: 2
Joined: Sun Sep 05, 2021 6:02 am

Correct model HDD for TS-809U

Post by MikeyE »

I purchased a used QNAP TS-809U NAS. After powering it up and waiting 24 hours two drives are in a "Warning" state. In "RAID Management" is says the status is "In degraded mode - Read only Failed Drive(s) 7". Drive 4 and 7 both show "Warning" in the "SMART Information" column of "Volume Management".

Image

After reading a couple other posts it seems I should replace drives 4 and 7. The drive model number is WDC WD2003FYYS-02W0B0. My question is where can I buy replacement drives? I found this listing on Server Supply, but as the last part of the model number is not provided I am not sure if it is the correct drive. Is the following the correct drive?

https://www.serversupply.com/HARD%20DRI ... 123756.htm
Last edited by OneCD on Sun Sep 05, 2021 6:40 am, edited 1 time in total.
Reason: removed tracking tag from link
Top
User avatar
dolbyman
Guru
Posts: 35274
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Correct model HDD for TS-809U

Post by dolbyman »

replace with any 2TB NAS compatible drive models(WD Black are not NAS rated)
a RAID6 should continue to work with two failures though
Top
Post Reply

Return to “Hardware & Software Compatibility”