Report your printer that doesn't work with QNAP NAS

Printers, HDDs, USB/eSATA drives, 3rd-party programs
Locked
marc.madsen
Starting out
Posts: 14
Joined: Sun Mar 20, 2011 2:27 pm

Re: Report your printer that doesn't work with QNAP NAS

Post by marc.madsen » Mon Oct 27, 2014 3:06 am

l3066 wrote:Same problem here.
NAS: TS-412
Firmware Version: 3.4.4 Build 0718T
Printer: Epson EPL-6200L

The USB printer is being detected and showed up in the QNAP web interface (External Device -> USB Printer) with Status = Ready.

Adding the printer on both my linux and MAC laptop -- NO problem.

Problem:
When I tried to print a test page from my linux laptop, my laptop said it has been successfully printed. On the other hand, the QNAP web page under the USB printer showed the the printing event with completed.
Problem is that the actual test page was not being printed from the printer physically.

Any workaround or solution to this problem? Thanks


Completely the same issue with me. My QNAP TS-659 pro+ with newest firmware, using the newest Macbook Air with the newest drivers. Everything appears fine, but my EPSON EPL-6200L newer prints anything. Even though the NAS says print job completed. i bought the printer because it was on the compatibility list.. a fix is much needed

re05769
First post
Posts: 1
Joined: Mon Oct 06, 2014 12:27 am

Re: Report your printer that doesn't work with QNAP NAS

Post by re05769 » Sun Nov 16, 2014 10:40 am

Success - after a little bit of difficulty.
Bottom Line: Try a different QNAP USB port (if possible)
My Hardware:
TS-870 Pro - Firmware 4.1.1 2014/11/01
Canon MP830

I just configured a new TS-x70 and connected a PIXMA Canon MP830. I plugged the printer USB cable into the upper right hand USB port on the back of the QNAP.
The printer was recognized and immediately set up by the QNAP. A "xxxxxPS2" "service name" (print queue) was created.
I set up the printer on my Win7 laptop and printed the Windows printer "test page". The print job got to the QNAP print queue but did not print.

After several attempts/changes on the laptop, I decided to move the printer's USB cable to a different port on the back of the QNAP (lower left).
A new "xxxxxPS5" "service name" (print queue) was created.
My laptop automatically changed to use the "xxxxxPS5" device and I'm now able to print successfully.

Mhstein57
New here
Posts: 5
Joined: Mon Mar 24, 2014 9:14 am

Re: Report your printer that doesn't work with QNAP NAS

Post by Mhstein57 » Thu Dec 04, 2014 5:46 am

I am currently using the Epson Workforce 3540 Network printer and my NAS TS451- or 421 can't recogn printer?
Any suggestions would be helpful and appreciated !!

mcsnoop
First post
Posts: 1
Joined: Fri Dec 12, 2014 5:49 pm

Re: Report your printer that doesn't work with QNAP NAS

Post by mcsnoop » Fri Dec 12, 2014 5:54 pm

Printer: Samsung ML-1610
QNAP: SS-839 Pro
OS: Mac 10.9.5

Problem:
Device has been detected correctly, but if I'm printing something the printer start and stop. Thats all.
In the QNAP Log the job is finished.

Before I upgrade my Mac I used the ML-1610 directly and all was fine.

Now I have the workaround over a vm with an old Mac version or any Windows.

If the printer will be run correctly at the QNAP it will be nice.

=(

wirroj
New here
Posts: 5
Joined: Thu Dec 25, 2014 8:19 pm

Re: Report your printer that doesn't work with QNAP NAS

Post by wirroj » Thu Jan 01, 2015 12:37 am

Brother DCP 7055. Recognized by TS-212P as printer, printer shows up on Linux PC, any attempt to print results in emptying of paper tray without printing.

IEINCH
New here
Posts: 3
Joined: Sun Dec 22, 2013 2:56 am

Re: Report your printer that doesn't work with QNAP NAS

Post by IEINCH » Thu Jan 15, 2015 6:06 am

Samsung CLX-3305 doesn't work, Wiki updated to reflect this.
QNAP, you guys are doing a lousy job with printers.

User avatar
Toxic17
Ask me anything
Posts: 5158
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: Report your printer that doesn't work with QNAP NAS

Post by Toxic17 » Thu Jan 15, 2015 6:51 am

Please keep posting your problems here. good to see a 6+ year old post really works for you (NOT) ;)

I'm pretty sure the Original poster doesn't even work for QNAP any longer, and QNAP does not give any technical support to a community based forum.

When are people going to learn?

If you have a problem - raise a Ticket with QNAP.
Regards Simon

QTS 4.x User Guidex

QNAP Club Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


NAS: TS-473-32GB QM2-2P QXG-10G1T 4.4.1.1064 • TVS-463-16GB 4.4.1.1064 QM2-2S10G1TB • TS-459 Pro 2GB 4.2.6 • TS-121 4.3.3.0998 • APC Back-UPS ES 700G •
QPKG's: TwonkyServer 8.51 • Apache73 • QSonarr 3.0.1.503 • QNBZGet 21.0 • phpMyAdmin 4.9.0.1 • Qmono 5.20.1.19 • McAfee 2.2.1 • Lychee 3.2.15 • HBS 3.0.190802 • LEgo v3.0.0
Network: VM Hub 3.0 <500/35> • UniFi USG Pro 4 • UniFi USW-16-150W • UniFi USW-8-60W • UniFi CloudKey Gen2+• UniFi G3-Flex • UAP AC Pro • UAP AC Lite • SLM2008 • Dell 7050 MFF •

williamjames07
New here
Posts: 6
Joined: Wed Jan 21, 2015 4:19 pm

Re: Report your printer that doesn't work with QNAP NAS

Post by williamjames07 » Wed Jan 28, 2015 7:28 pm

May be it will work .

MrMark
First post
Posts: 1
Joined: Wed Feb 04, 2015 5:38 am

Re: Report your printer that doesn't work with QNAP NAS

Post by MrMark » Wed Feb 04, 2015 5:49 am

TS-110 works rather badly with Dymo LabelWriter 330 Turbo

It takes 30 seconds to start printing, as opposed to instantaneously when the same printer is shared on a Windows machine. If the drive is already spun up on the NAS, it is slightly faster, but still quite slow. The QNAP print server also ignores the number of copies, so for example, if try to print 50 copies of a certain label, only one label actually prints.

User avatar
Toxic17
Ask me anything
Posts: 5158
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: Report your printer that doesn't work with QNAP NAS

Post by Toxic17 » Wed Feb 04, 2015 8:38 am

Please keep posting your problems here (NOT). good to see a 6+ year old post really works for you (NOT) ;)

I'm pretty sure the Original poster doesn't even work for QNAP any longer, and QNAP does not give any technical support to a community based forum.

When are people going to learn?

If you have a problem - raise a Ticket with QNAP.
Regards Simon

QTS 4.x User Guidex

QNAP Club Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


NAS: TS-473-32GB QM2-2P QXG-10G1T 4.4.1.1064 • TVS-463-16GB 4.4.1.1064 QM2-2S10G1TB • TS-459 Pro 2GB 4.2.6 • TS-121 4.3.3.0998 • APC Back-UPS ES 700G •
QPKG's: TwonkyServer 8.51 • Apache73 • QSonarr 3.0.1.503 • QNBZGet 21.0 • phpMyAdmin 4.9.0.1 • Qmono 5.20.1.19 • McAfee 2.2.1 • Lychee 3.2.15 • HBS 3.0.190802 • LEgo v3.0.0
Network: VM Hub 3.0 <500/35> • UniFi USG Pro 4 • UniFi USW-16-150W • UniFi USW-8-60W • UniFi CloudKey Gen2+• UniFi G3-Flex • UAP AC Pro • UAP AC Lite • SLM2008 • Dell 7050 MFF •

gigillo73
New here
Posts: 4
Joined: Wed Feb 13, 2013 9:36 pm

Re: Report your printer that doesn't work with QNAP NAS

Post by gigillo73 » Sat Feb 14, 2015 10:33 pm

TS110, firmware 4.1.2
USB Printer: HP Deskjet F4100

It is not more possible to print... Before a couple of firmware update it was possible, please could you check if there are new bugs?
Thanks.

User avatar
Toxic17
Ask me anything
Posts: 5158
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: Report your printer that doesn't work with QNAP NAS

Post by Toxic17 » Sun Feb 15, 2015 5:22 am

gigillo73 wrote:TS110, firmware 4.1.2
USB Printer: HP Deskjet F4100

It is not more possible to print... Before a couple of firmware update it was possible, please could you check if there are new bugs?
Thanks.


submit a ticket. please read before posting in this topic.

If you have a problem - raise a Ticket with QNAP.


this post is 6 years old. QNAP gives no support in this thread any longer, thread closed
Regards Simon

QTS 4.x User Guidex

QNAP Club Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


NAS: TS-473-32GB QM2-2P QXG-10G1T 4.4.1.1064 • TVS-463-16GB 4.4.1.1064 QM2-2S10G1TB • TS-459 Pro 2GB 4.2.6 • TS-121 4.3.3.0998 • APC Back-UPS ES 700G •
QPKG's: TwonkyServer 8.51 • Apache73 • QSonarr 3.0.1.503 • QNBZGet 21.0 • phpMyAdmin 4.9.0.1 • Qmono 5.20.1.19 • McAfee 2.2.1 • Lychee 3.2.15 • HBS 3.0.190802 • LEgo v3.0.0
Network: VM Hub 3.0 <500/35> • UniFi USG Pro 4 • UniFi USW-16-150W • UniFi USW-8-60W • UniFi CloudKey Gen2+• UniFi G3-Flex • UAP AC Pro • UAP AC Lite • SLM2008 • Dell 7050 MFF •

Locked

Return to “Hardware & Software Compatibility”