I have a server with Network UPS Tools installed. NUT on this server is operating in netserver mode. I have succesfully added a second machine in NUT slave mode and wanted to have a TS 219P-II operating in slave mode too. Although I initially installed qpkg/nut, I then found out that some basic NUT functionality is present.
So from web config I enabled UPS support and then select "Network UPS slave" as the protocol, specifying the IP address of my server in the lan. After doing so, on the server system I can see that the qnap box indeed tries to connect, but fails establishing a connection:
Code: Select all
Jun 12 22:55:29 server upsd[2605]: Client on 192.168.1.99 logged out
Jun 12 22:55:29 server upsd[2605]: Client on 192.168.1.99 logged out
Jun 12 22:55:32 server upsd[2605]: Connection from 192.168.1.99
Jun 12 22:55:32 server upsd[2605]: Client on 192.168.1.99 logged out
Jun 12 22:55:32 server upsd[2605]: Connection from 192.168.1.99
Jun 12 22:55:32 server upsd[2605]: Client on 192.168.1.99 logged out
Again, please note that I am using the embedded NUT client and not the qpkg one...