Samba start up fails on QTS 4.3.6

FTP Server, File Server, DDNS, SAMBA, AFP, NFS
Post Reply
User avatar
britesc
Getting the hang of things
Posts: 89
Joined: Sat May 08, 2010 6:08 pm
Location: Spain

Samba start up fails on QTS 4.3.6

Post by britesc » Tue Sep 17, 2019 5:09 pm

TS-431U - 4.3.6.1050 (30/08/2019)

Hi,
Since upgrade to 4.3.6.1050, I no longer have Samba access.
I have checked and tried a /etc/init.d/smb.sh restart, all this does is shutdown the winbindd daemon pause for awhile and then restart the winbindd daemon. Samba does not start
I checked the /var/log/log.smbd and got the following results.
[2019/09/17 10:44:25.785678, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:44:58.135988, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:45:35.059690, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:46:14.524443, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:46:53.416806, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:47:32.871239, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:48:13.747827, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:48:47.969899, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:49:20.569328, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:49:53.096414, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:50:17.183550, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:50:22.064611, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:50:26.122576, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:50:29.068865, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:50:33.824644, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:50:54.883228, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:51:27.497510, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:52:00.362003, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:52:34.236576, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:53:07.006239, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:53:39.430528, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
[2019/09/17 10:54:11.881935, 0] (lp_set_enum_parm)
WARNING: Ignoring invalid value 'disable' for parameter 'smb encrypt'
Obviously I have stopped any further server updates as smb is widely used.
Does anyone have any idea what has gone wrong and how to re-enable samba?

Thanks and kind regards,
jB 8)
8) (I'm not cool, just nearly blind)
QNAP TS431 - NAS
QNAP TS419P - NAS

User avatar
skypx
Easy as a breeze
Posts: 251
Joined: Sat Aug 15, 2009 4:44 pm

Re: Samba start up fails on QTS 4.3.6

Post by skypx » Tue Sep 17, 2019 5:33 pm

All the information you need is in the thread listed below.

viewtopic.php?f=142&t=150355
TVS-871 i7 16GB Ram
Firmware 4.3.6.0805 Build 20181228
8x HGST HUH721212ALN600 LEGNT3D0 RAID 5
QNAP Network LAN-10G2T-X550T2
Netgear XS708Ev2

Ron1963
Easy as a breeze
Posts: 369
Joined: Wed Apr 28, 2010 9:22 pm

Re: Samba start up fails on QTS 4.3.6

Post by Ron1963 » Tue Sep 17, 2019 5:36 pm

A tiny bit of searching on the forum would have lead you to f.i. this posting viewtopic.php?f=185&t=150168 which is one of many of Samba problems with recent (and withdrawn) firmware like 4.3.6.build1050. This topic gives you a fix as well. Giveaway: "disable" in your logging should have been "disabled".
1x TS431, 1x TS251, 1x TS253

User avatar
britesc
Getting the hang of things
Posts: 89
Joined: Sat May 08, 2010 6:08 pm
Location: Spain

Re: Samba start up fails on QTS 4.3.6

Post by britesc » Tue Sep 17, 2019 6:09 pm

Thanks to all I tried searching but cannot read too much due to my eyesight issues. Thank you for helping me out.
8) (I'm not cool, just nearly blind)
QNAP TS431 - NAS
QNAP TS419P - NAS

Post Reply

Return to “File Sharing”