I want to connect 2 Nas devices (private & business) to each other via wireguard to back up the bussines to the private NAS with HBS.
I have set up wireguard on the bussines nas and this works via my mobile phone and latop, but the bussines nas is not found at HBS via the private nas.
Is there a way to test if the vpn is connected ?
Is it possible to use a NAS as server and client at the same time?
wireguard
-
- New here
- Posts: 2
- Joined: Sun Jan 23, 2022 2:40 am
wireguard
You do not have the required permissions to view the files attached to this post.
- OneCD
- Guru
- Posts: 12147
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: wireguard
Hi and welcome to the forum.
This is an English-language-only forum. Please post your screenshots in English.
This is an English-language-only forum. Please post your screenshots in English.
-
- New here
- Posts: 2
- Joined: Sun Jan 23, 2022 2:40 am
Re: wireguard
settings :
Server
server name : Garage
Private key : xxxxxx
public key : xxxxxx
IP adress : 192.168.7.1/24
listenport : 51820
netwerkinterface : all
DNS : 8.8.8.8
Peer :
Name : Prive
public key : xxxxxx
pre shared key:
endpoint :
allowed IPs : 192.168.7.5
client :
ip adress : 192.168.7.5/32
listenport : 51820
DNS : 8.8.8.8
public key : xxxxxxxxxxxx
endpoint : xxxx.myqnapcloud.com
pre shared key :
allowed ips : 192.168.1.200/32
Server
server name : Garage
Private key : xxxxxx
public key : xxxxxx
IP adress : 192.168.7.1/24
listenport : 51820
netwerkinterface : all
DNS : 8.8.8.8
Peer :
Name : Prive
public key : xxxxxx
pre shared key:
endpoint :
allowed IPs : 192.168.7.5
client :
ip adress : 192.168.7.5/32
listenport : 51820
DNS : 8.8.8.8
public key : xxxxxxxxxxxx
endpoint : xxxx.myqnapcloud.com
pre shared key :
allowed ips : 192.168.1.200/32