TS-453Bmini
QTS 5.0.0.1986
After upgarde yesterday, suddenly the smb connections are all dead. After some investigation, I connected to SSH.
And I tried to run smb2status
"/usr/local/samba/sbin/smbd" ... not found.
And I tried restart smb by using
[~] # /etc/init.d/smb.sh restart
Restarting SMB services:
Shutting down SMB services: smbd smbd-notifyd cleanupd mdssd-master mdssd-child nmbd.
/etc/init.d/winbind: line 7: /usr/local/samba/sbin/winbindd: No such file or directory
Looks like it is very wrong that the /usr/local/samba/sbin/smbd and /usr/local/samba/sbin/winbindd are missing...
What should I do ???
Samba Is DEAD after upgrade to QTS 5.0
-
- New here
- Posts: 2
- Joined: Mon May 16, 2022 7:11 pm
Samba Is DEAD after upgrade to QTS 5.0
Last edited by Toxic17 on Tue May 17, 2022 11:49 pm, edited 2 times in total.
Reason: Update Topic Title (Typo)
Reason: Update Topic Title (Typo)
-
- New here
- Posts: 2
- Joined: Mon May 16, 2022 7:11 pm
Re: Samba Is DEAD after upagrde to QTS 5.0
Tried various things the smbd it not coming back... If I upgrade fireware for next version, will the smbd coming back ? I am using DLINA for media streaming, and FTP to upload file. I am fine without SMB for now. Not sure if the smbd cann be reinstall in a manualy way, any suggestion is appreciated!
- dolbyman
- Guru
- Posts: 35276
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Samba Is DEAD after upagrde to QTS 5.0
just reinstall the same version again and check
-
- Getting the hang of things
- Posts: 73
- Joined: Tue Feb 21, 2017 10:59 am
- Location: Vancouver, Canada
Re: Samba Is DEAD after upgrade to QTS 5.0
This may be just a guess, because I have been having access problems over just the last few days but...
in the Control Panel \ Network & File Services \ Win Mac NFS \ Microsoft \ area, go down to the Advanced Options button.
There seems to be a new section down there. I removed the restrictions in the anonymous users sections and my ability to access files with Windows Explorer came back. I've been doing so much fiddling to get this all back working I'm starting to forget just exactly what I've changed.
in the Control Panel \ Network & File Services \ Win Mac NFS \ Microsoft \ area, go down to the Advanced Options button.
There seems to be a new section down there. I removed the restrictions in the anonymous users sections and my ability to access files with Windows Explorer came back. I've been doing so much fiddling to get this all back working I'm starting to forget just exactly what I've changed.
- dolbyman
- Guru
- Posts: 35276
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Samba Is DEAD after upgrade to QTS 5.0
any setting in GUI would not break/delete the SMB service, as posted further up
-
- Getting the hang of things
- Posts: 73
- Joined: Tue Feb 21, 2017 10:59 am
- Location: Vancouver, Canada
Re: Samba Is DEAD after upgrade to QTS 5.0
Stranger things have happened. And what is the cost of trying when nothing else is working ?
- dolbyman
- Guru
- Posts: 35276
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Samba Is DEAD after upgrade to QTS 5.0
Op should try to reinstall the firmware , has helped often with exactly the described issues (plenty of threads about it)
-
- Getting the hang of things
- Posts: 73
- Joined: Tue Feb 21, 2017 10:59 am
- Location: Vancouver, Canada
Re: Samba Is DEAD after upgrade to QTS 5.0
vs trying a couple of my changes that take 2 minutes or less ?
- dolbyman
- Guru
- Posts: 35276
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Samba Is DEAD after upgrade to QTS 5.0
If you think your changes make the whole samba service account folder disappear .. sure OP can try