ARRGH!
Desperate for help with this.
My TS210 asked to be upgraded from 4.2.2 today to 4.2.3. I let it do the upgrade and all seemed well.
However, although I can still access the NAS via IP address it's no longer showing up on any of my Windows boxes - all running Windows 10.
It was fine before the update and - sod's law - I really need to access the music files on this box for an urgent project!
I've tried contacting it from a number of Windows machines and it's not showing up in Network. It doesn't seem to be connecting to my Mac either.
I was going to roll back to 4.2.2 but up pops some dire warnings about data loss. What do I do? I need to get this back up and running!
Please help!
It's running 2 x WD Red 2TB in RAID 1
Help! Upgrading to 4.2.3 means can no longer see NAS on network
-
- New here
- Posts: 4
- Joined: Thu Sep 13, 2012 5:53 pm
-
- Starting out
- Posts: 26
- Joined: Sat Aug 01, 2015 8:03 am
Re: Help! Upgrading to 4.2.3 means can no longer see NAS on network
Did you read this thread?
-
- New here
- Posts: 4
- Joined: Thu Sep 13, 2012 5:53 pm
Re: Help! Upgrading to 4.2.3 means can no longer see NAS on network
Rolling back to 4.2.2 fixed the problem and I was immediately able to see the NAS in Windows 10 again. So something in 4.2.3 breaks whatever was working fine in 4.2.2.
- oyvindo
- Experience counts
- Posts: 1399
- Joined: Tue May 19, 2009 2:08 am
- Location: Norway, Oslo
Re: Help! Upgrading to 4.2.3 means can no longer see NAS on network
Go to 4.2.4 and Samba 3
No problems there AFAIK
No problems there AFAIK