After the update to 4.3.3, when i move files from my local HDD to the QNAP 470Pro, the file transfer freezes the nas during the transfer. The nas cannot be shut down from the interface or from the button select.
anyone else encountering this? file copy to file station works ok.
Windows Move
- schumaku
- Guru
- Posts: 43579
- Joined: Mon Jan 21, 2008 4:41 pm
- Location: Kloten (Zurich), Switzerland -- Skype: schumaku
- Contact:
Re: Windows Move
Re-apply the (same or current) firmware image again, ideally using the most verbose process -> http://wiki.qnap.com/wiki/Manually_Updating_Firmware
-
- Know my way around
- Posts: 126
- Joined: Fri Dec 18, 2015 2:43 pm
Re: Windows Move
This is another lesson, if it ain't broke, don't upgrade firmware...
- schumaku
- Guru
- Posts: 43579
- Joined: Mon Jan 21, 2008 4:41 pm
- Location: Kloten (Zurich), Switzerland -- Skype: schumaku
- Contact:
Re: Windows Move
Plenty of reasons to keep the firmware current.jon96789 wrote:This is another lesson, if it ain't broke, don't upgrade firmware...
Hard say as there is no information on how the process was run, if this HDD is plugged to the the NAS USB port, what file system, ...
-
- New here
- Posts: 5
- Joined: Thu Feb 05, 2015 12:39 pm
Re: Windows Move
the HDD is not an external hdd. It is being copied into a share folder i created on my data volume, on my raid 5.. I didnt change the file system so it would be the default.