Hello,
I have a TS-451+
Already had 2 HDD drives running (raid1).
Today I installed a 3th HDD.
I want to use this drive for multimedia purposes such as movies,....
Everything was easy installed and a dataVol2 was generated.
During the installation I choose for static Single Volume and no raid selection because I just want to put some movies on it (no back-up required).
I created a folder called multimedia1 in my dataVol2. (because multimedia folder was already existing in my dataVol1.)
I managed to put some movies in this folder.
If I now start-up the media player CODI this multimedia2 map is not visible and I can't play the movies on it.
If have also an external Harddisk and this is easily detected by CODI.
Anyone who can help me?
Kind regards,
Ferdy
TS-451+ Add a 3th drive problem to detect drive with CODI
-
- New here
- Posts: 5
- Joined: Thu Nov 09, 2017 10:23 pm
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: TS-451+ Add a 3th drive problem to detect drive with CODI
Just because you added an additional drive doesn't mean that KODI automatically adds it. You would need to add it as a source. Check http://kodi.wiki/view/quick_start_guide
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
-
- New here
- Posts: 5
- Joined: Thu Nov 09, 2017 10:23 pm
Re: TS-451+ Add a 3th drive problem to detect drive with CODI
Clear for me, but I already spend a while looking in the KODI menu how to add my new drive.
I got to step 4 before I got stuck.
Step 4: The ADD VIDEO SOURCE
Step 5: Browse the path ==> If I do I see strange locations which (Locations I can't directly match to the correct path)
==> Home Folder
==> Network File System (NTFS)
==> Root File system
==> SAP streams
==> UPnP devices
==> Windows network (SMB)
==> Zeroconf browser ==> only if I choose this path I can see a folder of my new driver but if I go further I have an other issue
==> I need to add a user name (my NAS username?? I don't now
==> And I need to enter a password (I assume also my NAS password)
==> And I need to highlight a button "Remember for this path"
None of this works I and if I press OK after entering all of this it stays on the same screen.
I have tried also to enter also directly the SMB path in the "Add video source" but this was also unsuccesfull.
I think I'm overseeing something essential.
I got to step 4 before I got stuck.
Step 4: The ADD VIDEO SOURCE
Step 5: Browse the path ==> If I do I see strange locations which (Locations I can't directly match to the correct path)
==> Home Folder
==> Network File System (NTFS)
==> Root File system
==> SAP streams
==> UPnP devices
==> Windows network (SMB)
==> Zeroconf browser ==> only if I choose this path I can see a folder of my new driver but if I go further I have an other issue
==> I need to add a user name (my NAS username?? I don't now
==> And I need to enter a password (I assume also my NAS password)
==> And I need to highlight a button "Remember for this path"
None of this works I and if I press OK after entering all of this it stays on the same screen.
I have tried also to enter also directly the SMB path in the "Add video source" but this was also unsuccesfull.
I think I'm overseeing something essential.
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: TS-451+ Add a 3th drive problem to detect drive with CODI
If you are on the NAS, it would normally be under Root FileSystem > /share/<whatever new shared folder you created and put media on>
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
-
- New here
- Posts: 5
- Joined: Thu Nov 09, 2017 10:23 pm
Re: TS-451+ Add a 3th drive problem to detect drive with CODI
Can you be a bit more specific?
Do I have to look in QTS? Or in my Qnap configuration?
Thanks
Do I have to look in QTS? Or in my Qnap configuration?
Thanks
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: TS-451+ Add a 3th drive problem to detect drive with CODI
Step 4: The ADD VIDEO SOURCE
Step 5: Browse the path -> Root File System > /share/<whatever new shared folder you created on Drive3 and put media on>
Step 5: Browse the path -> Root File System > /share/<whatever new shared folder you created on Drive3 and put media on>
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
-
- New here
- Posts: 5
- Joined: Thu Nov 09, 2017 10:23 pm
Re: TS-451+ Add a 3th drive problem to detect drive with CODI
KODI => Root file system , done
The options I now get are looking strange and I don't see any link to my 3th drive even no link to my first driver
Some options I see:
=bin
=dev
=etc
=home
=lib
=lib32
=lib64
........
In none of them I find the multimadia map I created on the drive 3 or even multimedia on drive 1 I can't find
The options I now get are looking strange and I don't see any link to my 3th drive even no link to my first driver
Some options I see:
=bin
=dev
=etc
=home
=lib
=lib32
=lib64
........
In none of them I find the multimadia map I created on the drive 3 or even multimedia on drive 1 I can't find
-
- New here
- Posts: 5
- Joined: Thu Nov 09, 2017 10:23 pm
Re: TS-451+ Add a 3th drive problem to detect drive with CODI
Solved thanks for the help.
I needed the wait for a while. Then the added drive 3 and corresponding subdirectory was visible.
Cheers
I needed the wait for a while. Then the added drive 3 and corresponding subdirectory was visible.
Cheers