Do I read that correctly, that this patch now reflects the settings in the web interface gui, instead of the first "quick'n'dirty" thing which was disabling the "guest = invalid" entry what ever else has been configerd via web gui ?BrutisNZ wrote: ↑Sat Jun 29, 2019 10:46 am
so the code looks like below
Save the file and restart SMB with /etc/init.d/smb.sh restart
Code: Select all
… # "map to guest" reset. Dependes on "restrict anonymous". restrict_anonymous=`/sbin/getcfg global "restrict anonymous" -d "NOT_FOUND" -f ${CONFIG}` if [ "x${restrict_anonymous}" == "x2" ]; then # restrict anonymous level 2. /sbin/setcfg global "map to guest" "Never" -f ${CONFIG} /sbin/setcfg global "invalid users" "guest" -f ${CONFIG} else /sbin/setcfg global "map to guest" "Bad User" -f ${CONFIG} /sbin/setcfg global "invalid users" "" -f ${CONFIG} fi }
Unable to access NAS as guest following firmware update to v4.3.6.0979
-
- New here
- Posts: 3
- Joined: Fri Jun 28, 2019 2:07 am
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
-
- Starting out
- Posts: 48
- Joined: Wed Feb 07, 2018 7:12 pm
- Location: New Zealand
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
It is broken in the same way as 4.3.6.0979
Sony KD-65A8H OLED : (Android) Kodi 20.2.0 | Onkyo TX-NR686 7.1 Atmos
QNAP TS-453B 16GB : 30TB by x2 Seagate 10TB ST10000NE0004 x1 Seagate 10TB ST10000NE0008 : QTS 5.1.1.2491 : HDStation 4.2.5 : Kodi 20.2.0 (My QNAP)
QNAP TS-453B 16GB : 30TB by x2 Seagate 10TB ST10000NE0004 x1 Seagate 10TB ST10000NE0008 : QTS 5.1.1.2491 : HDStation 4.2.5 : Kodi 20.2.0 (My QNAP)
-
- Starting out
- Posts: 48
- Joined: Wed Feb 07, 2018 7:12 pm
- Location: New Zealand
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
Yes it should do but I cannot confirm 100% so use at your own risk.zebulon-ufh wrote: ↑Tue Jul 02, 2019 7:22 pm Do I read that correctly, that this patch now reflects the settings in the web interface gui, instead of the first "quick'n'dirty" thing which was disabling the "guest = invalid" entry what ever else has been configerd via web gui ?
Honestly if you are just fixing the guest account issue then "yes" it will fix it and because no one has reported that 4.3.6.0979 is failing with the other levels of "Restrict anonymous users from accessing SMB shared folders" they should also work correctly too.
Sony KD-65A8H OLED : (Android) Kodi 20.2.0 | Onkyo TX-NR686 7.1 Atmos
QNAP TS-453B 16GB : 30TB by x2 Seagate 10TB ST10000NE0004 x1 Seagate 10TB ST10000NE0008 : QTS 5.1.1.2491 : HDStation 4.2.5 : Kodi 20.2.0 (My QNAP)
QNAP TS-453B 16GB : 30TB by x2 Seagate 10TB ST10000NE0004 x1 Seagate 10TB ST10000NE0008 : QTS 5.1.1.2491 : HDStation 4.2.5 : Kodi 20.2.0 (My QNAP)
-
- New here
- Posts: 2
- Joined: Tue Jul 02, 2019 7:00 pm
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
- sunwukong
- Starting out
- Posts: 21
- Joined: Fri Oct 03, 2008 1:03 am
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
Downgraded to 895 -- no joy.
-
- Starting out
- Posts: 48
- Joined: Wed Feb 07, 2018 7:12 pm
- Location: New Zealand
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
Below is a snippet of my ongoing battle with the QNAP Help Desk. This is after them asking the nth time for more logs.
They just won't pass the information in this FORUM higher up the food chain. I have played nicely before but now I'm at the end of my wick!
They just won't pass the information in this FORUM higher up the food chain. I have played nicely before but now I'm at the end of my wick!
Hi there,
The logs will tell you nothing that you haven’t already seen from the logs that I and other people on the Forum have supplied to QNAP.
The problem is in the way the Code of the file smb.sh was rewritten in 4.3.6.0979.
I have pointed QNAP to the FORUM where this was discussed and in that FORUM provided a solution for your customers (who have still not received a solution from QNAP)
A link was provided previously and here is a link to the exact solution and what is wrong with the code viewtopic.php?f=185&t=149124&start=30#p719369
You need to escalate this to someone who is a “Programmer” of the firmware. I’m sure once they understand the problem and see how the code was rewritten they can fix it quickly.
Kind regards,
Bruce.
Sony KD-65A8H OLED : (Android) Kodi 20.2.0 | Onkyo TX-NR686 7.1 Atmos
QNAP TS-453B 16GB : 30TB by x2 Seagate 10TB ST10000NE0004 x1 Seagate 10TB ST10000NE0008 : QTS 5.1.1.2491 : HDStation 4.2.5 : Kodi 20.2.0 (My QNAP)
QNAP TS-453B 16GB : 30TB by x2 Seagate 10TB ST10000NE0004 x1 Seagate 10TB ST10000NE0008 : QTS 5.1.1.2491 : HDStation 4.2.5 : Kodi 20.2.0 (My QNAP)
- kizza42
- New here
- Posts: 3
- Joined: Wed Apr 01, 2015 9:16 am
- Location: Sydney, Australia
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
Just chiming in to say that this issue affects me as well. I have legacy clients that can no longer access their shares. Please resolve this asap QNAP
TVS-671 | i3 | 16gb
2x ST8000AS0002-1NA17Z | 2x WD30PURX-64P6ZY0 | 1x WD40PURX-64GVNY0 | 1x 850 EVO 250GB
2x ST8000AS0002-1NA17Z | 2x WD30PURX-64P6ZY0 | 1x WD40PURX-64GVNY0 | 1x 850 EVO 250GB
-
- New here
- Posts: 8
- Joined: Tue Jun 24, 2008 4:48 am
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
Same issue for me. Can't access from either Win7 or Win10.
-
- New here
- Posts: 4
- Joined: Fri Dec 28, 2018 2:50 am
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
I was about to post new topic when I saw this one. I am not updating firmware until after at least a month passes and I check this forum first from now on. This is unacceptable.
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
The only way you are going to get QNAP's attention is to open a ticket. QNAP does not participte in the forums.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
-
- New here
- Posts: 4
- Joined: Wed Apr 17, 2019 9:06 am
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
in last year. QNAP always released firmware update by weekly or bi-weekly.
...in normal case...
but. I think this is emergency case... QNAP should release new firmware for fix it.
I use 2 TS-1263 model 80T and 1 TS-1253 80T ... for 300 employee..
and, I can stand anymore....
I will sue... my vendor.
...in normal case...
but. I think this is emergency case... QNAP should release new firmware for fix it.
I use 2 TS-1263 model 80T and 1 TS-1253 80T ... for 300 employee..
and, I can stand anymore....
I will sue... my vendor.
-
- New here
- Posts: 4
- Joined: Wed Apr 17, 2019 9:06 am
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
and... I would like to adding a comments for this issues.
I rollback the firmware 979 --> 959 --> 949 --> 923 --> 895...
but... issues were not solved.
I rollback the firmware 979 --> 959 --> 949 --> 923 --> 895...
but... issues were not solved.
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
QNAP does not and has not released firmware on a weekly or biweekly basis.njcha wrote: ↑Thu Jul 04, 2019 7:50 am in last year. QNAP always released firmware update by weekly or bi-weekly.
...in normal case...
but. I think this is emergency case... QNAP should release new firmware for fix it.
I use 2 TS-1263 model 80T and 1 TS-1253 80T ... for 300 employee..
and, I can stand anymore....
I will sue... my vendor.
There is a temporary solution. Implement it to solve your issue.
Open a ticket with QNAP.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
-
- New here
- Posts: 2
- Joined: Sun Feb 24, 2019 6:28 pm
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
Hello,
Same issue on my TS-1079 Pro and the same firmware, the above change to smb.sh fixed it for me.
I did raise a support call and mention this forum post too, been told to try and disable guest and reboot which didnt help.
Same issue on my TS-1079 Pro and the same firmware, the above change to smb.sh fixed it for me.
I did raise a support call and mention this forum post too, been told to try and disable guest and reboot which didnt help.
-
- New here
- Posts: 7
- Joined: Mon Jun 24, 2019 9:40 pm
Re: Unable to access NAS as guest following firmware update to v4.3.6.0979
Still playing the waiting game with Support, sent the logs last Thursday and was told it's been escalated to their 2nd Line Support Team and to await an update... No update so have just chased! I suggest anyone with the issue ensures they have a support case logged/open so at least it flags the impact and hopefully makes them resolve sooner rather than later! Worked around the issue currently to get by...