Hi, i have a QNAP TS-251+ and i now cannot see any of the windows file shares, not sure if the firmware version update to 4.4.1.1031 was the issue but cannot seem to get them back. I got a message about malware scanner had cleaned up malware and to reset permissions on file shares, i have done this and all seems like it should be ok, but it seems like the windows file sharing on the QNAP now does not work, have disabled and re-enabled the windows file share system but still no luck
Was just wondering what could be the issue and hoe maybe to fix, i have a ticket open with support also
Thanks
Chris
Cannot access shares on firmware 4.4.1.1031
-
- Starting out
- Posts: 14
- Joined: Fri Dec 14, 2012 11:46 pm
-
- New here
- Posts: 2
- Joined: Mon Dec 30, 2013 1:36 pm
Re: Cannot access shares on firmware 4.4.1.1031
I have the same issue. The smbd daemon does not start. I have the TS-251+
-
- Starting out
- Posts: 14
- Joined: Fri Dec 14, 2012 11:46 pm
Re: Cannot access shares on firmware 4.4.1.1031
Hi, i have had to downgrade to 4.3.6.0993 as this is the latest firmware that the file sharing works on, even the latest 4.3.6.1050 has the windows file sharing bug, having to downgrade again now!
Chris
Chris
- Trexx
- Ask me anything
- Posts: 5388
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Cannot access shares on firmware 4.4.1.1031
I would suggest opening helpdesk tickets with QNAP as it seems like it might be a specific HW/SW issue potentially with your model.
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
-
- Starting out
- Posts: 14
- Joined: Fri Dec 14, 2012 11:46 pm
Re: Cannot access shares on firmware 4.4.1.1031
Hi, i have submitted a ticket but it seems lots of other people have the same issue so not sure is hardware related
Chris
Chris