TS-253A Sharing does not work
-
- New here
- Posts: 9
- Joined: Sat Nov 21, 2020 10:13 pm
TS-253A Sharing does not work
I have TS-253A nas
I had two 1GB disks on the device
I would see a folder on each disk
I replaced them with 4GB disks each
Now only one device appears and is not accessible
Where I create the shared folders back
i want discs without Raid
It does not work
I added pictures of the settings I made
I had two 1GB disks on the device
I would see a folder on each disk
I replaced them with 4GB disks each
Now only one device appears and is not accessible
Where I create the shared folders back
i want discs without Raid
It does not work
I added pictures of the settings I made
You do not have the required permissions to view the files attached to this post.
- dolbyman
- Guru
- Posts: 35248
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-253A Sharing does not work
you need to create the default shares and whatever individual shares you want
check the manual for share management
p.s. pretty sure you mean TB and not GB ..unless the drives are 20 years old
check the manual for share management
p.s. pretty sure you mean TB and not GB ..unless the drives are 20 years old
- Moogle Stiltzkin
- Guru
- Posts: 11448
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: TS-253A Sharing does not work
i've seen worse. i have a old usb flash drive that has 512mb.... lmfao....
yes you could setup individual drives as volumes. once done, go create shares and point to which volume.
yes you could setup individual drives as volumes. once done, go create shares and point to which volume.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- New here
- Posts: 9
- Joined: Sat Nov 21, 2020 10:13 pm
Re: TS-253A Sharing does not work
how do i do that ?Moogle Stiltzkin wrote: ↑Sun May 23, 2021 9:25 pm i've seen worse. i have a old usb flash drive that has 512mb.... lmfao....
yes you could setup individual drives as volumes. once done, go create shares and point to which volume.
where (in what screen) do i do that
- dolbyman
- Guru
- Posts: 35248
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-253A Sharing does not work
there is already static volumes on each drive ..just default and individual shares need to be created
- Moogle Stiltzkin
- Guru
- Posts: 11448
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: TS-253A Sharing does not work
3 seconds youtube search "qts how to create a share"m5167 wrote: ↑Sun May 23, 2021 9:49 pmhow do i do that ?Moogle Stiltzkin wrote: ↑Sun May 23, 2021 9:25 pm i've seen worse. i have a old usb flash drive that has 512mb.... lmfao....
yes you could setup individual drives as volumes. once done, go create shares and point to which volume.
where (in what screen) do i do that
https://www.youtube.com/watch?v=XQo4tvuQqNA
QNAP NAS Guide Part 1 - Setup, RAID, Volumes IP and Shared Folders
https://www.youtube.com/watch?v=**
Disk Volumes: Static Volume, Thick Volume, and Thin Volume, How to choose? | NAS TalkShow
https://www.youtube.com/watch?v=La_Htt0-Eck
QNAP NAS Settings and Configuration Part 1 - The Basics
https://www.youtube.com/watch?v=jawyy3vJKyI
when you create a share, you also need to have samba (smb) service enabled. during the smart install it would have prompted you to enable this service then, if you hadn't, you have to go qts > services and enable smb.
then on windows 10 pc, browse to networking select your nas from the list to login to it using windows explorer. it will prompt you for your credentials. make credentials otherwise you have to re-enter again manually each time.
So now you can go to those shares from win10 file explorer to access your files/folders.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- New here
- Posts: 9
- Joined: Sat Nov 21, 2020 10:13 pm
Re: TS-253A Sharing does not work
smb is working
Each disk has a shared folder
Each folder has permissions for everyone to read and write
When I access the network
I see the name of the device
When I tap on it
I get a message that requires a username and password
I need to enter the admin name and admin password
To enter
I want it to be as before
That both folders appeared on the network
And you do not need any user to enter
Each disk has a shared folder
Each folder has permissions for everyone to read and write
When I access the network
I see the name of the device
When I tap on it
I get a message that requires a username and password
I need to enter the admin name and admin password
To enter
I want it to be as before
That both folders appeared on the network
And you do not need any user to enter
You do not have the required permissions to view the files attached to this post.
- Moogle Stiltzkin
- Guru
- Posts: 11448
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: TS-253A Sharing does not work
if you dont want any credential pop ups, you either
1. do credential but save credentials. so you only enter once
2. enable guest access
before this you must
1. have the hdds setup volumes. if doing raid a pool.
2. enable smb
3. create shares to point toward the volume created
4. go to share permissions, then enable guest access.
then on a windows 10, go networks, browse to your nas click it opens windows explorer and it won't prompt credentials.
ez. you are welcome
1. do credential but save credentials. so you only enter once
2. enable guest access
before this you must
1. have the hdds setup volumes. if doing raid a pool.
2. enable smb
3. create shares to point toward the volume created
4. go to share permissions, then enable guest access.
then on a windows 10, go networks, browse to your nas click it opens windows explorer and it won't prompt credentials.
ez. you are welcome
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- New here
- Posts: 9
- Joined: Sat Nov 21, 2020 10:13 pm
Re: TS-253A Sharing does not work
I have already allowed guest access
smb is working
I did all these steps
I wrote this in the previous post
And it still does not work
The situation is as I described in the previous post
The only thing that is not clear to me
This is section 3 of what you wrote down
What do you mean "create shares to point toward the volume created"
I have already created the folders and their permissions
I did not understand the next step "point toward the volume created"
smb is working
I did all these steps
I wrote this in the previous post
And it still does not work
The situation is as I described in the previous post
The only thing that is not clear to me
This is section 3 of what you wrote down
What do you mean "create shares to point toward the volume created"
I have already created the folders and their permissions
I did not understand the next step "point toward the volume created"
You do not have the required permissions to view the files attached to this post.
-
- New here
- Posts: 9
- Joined: Sat Nov 21, 2020 10:13 pm
Re: TS-253A Sharing does not work
how do i fix this ?
- Moogle Stiltzkin
- Guru
- Posts: 11448
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: TS-253A Sharing does not work
In qts go to > control panel > shared folders >
1. click the icon for permission, check this is correct. guest access needs to be enabled for each share you want to have this enabled.
2. then check edit properties, make sure that is correct
If you are using windows 10, make sure network discovery is enabled
https://www.dummies.com/computers/opera ... indows-10/
Then right click on file explorer, browse down to network, see if your qnap is listed. click that. It should work at this point.... unless there is something else that requires further troubleshooting
also i assume you are using a static fixed lan ip for your qnap yes?
1. click the icon for permission, check this is correct. guest access needs to be enabled for each share you want to have this enabled.
2. then check edit properties, make sure that is correct
If you are using windows 10, make sure network discovery is enabled
https://www.dummies.com/computers/opera ... indows-10/
Then right click on file explorer, browse down to network, see if your qnap is listed. click that. It should work at this point.... unless there is something else that requires further troubleshooting
also i assume you are using a static fixed lan ip for your qnap yes?
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin