Motion Detection on QVR Pro for MOBOTIX T24

QVR Pro, QVR Pro Client, QVR Center and Surveillance Station
Post Reply
haumichblau
Starting out
Posts: 11
Joined: Sat Jul 05, 2014 4:28 pm

Motion Detection on QVR Pro for MOBOTIX T24

Post by haumichblau » Sat Oct 19, 2019 7:51 pm

Hello,
I am using QVR Pro. I managed to configure the recording of the T24. But the motion detection does not work.

Under Survaillance Station it worked with FTP-Upload. But I think in QVR Pro there is an other mechanism.

Do you have any tips how to configure Motion Detection?

My NAS has the actual firmware 4.4.1.1086 and THE MOBOTIX T24 has the version MX-V4.7.2.18.

Best regards,
Christian

AlastairStevenson
Experience counts
Posts: 2137
Joined: Wed Jan 08, 2014 10:34 pm

Re: Motion Detection on QVR Pro for MOBOTIX T24

Post by AlastairStevenson » Sun Oct 20, 2019 12:32 am

Does the Mobotix device have in-built motion detection, and have you configured it?
If not - you will need to use QVRPro motion detection instead of camera motion detection.
TS-431+ as primary storage and media server and a bunch of IP cams under Surveillance Station.

haumichblau
Starting out
Posts: 11
Joined: Sat Jul 05, 2014 4:28 pm

Re: Motion Detection on QVR Pro for MOBOTIX T24

Post by haumichblau » Sun Oct 20, 2019 12:52 am

Yes Motion Detection is active. I also get the red frame in the Live View when a motion has been detected.

But which event should I raise when the motion was detected?

Now I have "Visual Alarm: Red Frame". But what should I add that QVR Pro is informed?

Best regards,
Christian

AlastairStevenson
Experience counts
Posts: 2137
Joined: Wed Jan 08, 2014 10:34 pm

Re: Motion Detection on QVR Pro for MOBOTIX T24

Post by AlastairStevenson » Sun Oct 20, 2019 1:46 am

Presumably you want to configure a recording event in response to the motion notification.
TS-431+ as primary storage and media server and a bunch of IP cams under Surveillance Station.

haumichblau
Starting out
Posts: 11
Joined: Sat Jul 05, 2014 4:28 pm

Re: Motion Detection on QVR Pro for MOBOTIX T24

Post by haumichblau » Sun Oct 20, 2019 1:53 am

Yes. You are right.

Best regards,
Christian

haumichblau
Starting out
Posts: 11
Joined: Sat Jul 05, 2014 4:28 pm

Re: Motion Detection on QVR Pro for MOBOTIX T24

Post by haumichblau » Tue Oct 22, 2019 2:15 am

Hello,

Does anyone use QVR Pro with a MOBOTIX IP-Camera with motion detection?


Best regards,
Christian

Post Reply

Return to “Surveillance Solution”