countless false alarms during motion detection with steinel cam via rtsp

[HubertusHettenkofer]

I have integrated a Steinel Cam L620 via rtsp stream into the QVR-Pro.

Code: Select all

rtsp://x.x.x.x:554/user=admin&password=yyyyyyyyyy&channel=1&stream=0.sdp

Works so far.

But I get countless false alarms during motion detection. Despite the settings "Sensitivity" to 1(Lowest), "Light sensitivity" to 5(Lowest) and only a few detection areas without things moving.

Is there anything I can set in the stream parameters or how do I get the problem under control?

The Steinel APP also has a message for motion detection - only that is much "quieter".

Thank you and greetings
Hubertus

[HubertusHettenkofer]

My solution would be to temporarily turn off the light sensitivity - but where should I do that?