Hi,
I am trying to integrate a INSTAR IN-9408 temporary via ONVIF because this camera is not yet on the compatibility list.
I've tried various configurations, according to what I found it should be:
Model: ONVIF ProfileT Cameras
IP: camera's IP-Address
HTTP Port: 8080
RTSP Port: 554
HTTPS Port: 443
During configuration I receive a positive test result but after finishing setup, I would always have a "connection error" and receive "error frame".
Regards,
Stefan
INSTAR ONVIF configuration (IN-9408)
-
- New here
- Posts: 3
- Joined: Mon Nov 07, 2022 10:43 pm
-
- First post
- Posts: 1
- Joined: Sat Nov 12, 2022 12:30 am
Re: INSTAR ONVIF configuration (IN-9408)
Hello,
I have the same issue now.
Installed the INSTAR IN-9408 2k+ now and was happy that everything works - until I opened the QNAP Surveillance Station.
Then I saw that its possible to search for cameras so I selected ONVIF and it shows me all my old cameras but not the new one.
And all of them supporting ONVIF.
Then I tried to configure by myself with ONVIF. It says sometimes the IP Address cant be reached - but the PING TEST is successful.
I tought then it could work because the ONVIF "Test" Button says then a picture of a placeholder (camera) with a green check mark.
But if I want to view the camera its not working.
Very sad that there is a unique default for all cameras (ONVIF) which is supported by QNAP and then its not working for specific camera(s).
Hopefully there is a fix soon.
Best,
Paedy
I have the same issue now.
Installed the INSTAR IN-9408 2k+ now and was happy that everything works - until I opened the QNAP Surveillance Station.
Then I saw that its possible to search for cameras so I selected ONVIF and it shows me all my old cameras but not the new one.
And all of them supporting ONVIF.
Then I tried to configure by myself with ONVIF. It says sometimes the IP Address cant be reached - but the PING TEST is successful.
I tought then it could work because the ONVIF "Test" Button says then a picture of a placeholder (camera) with a green check mark.
But if I want to view the camera its not working.
Very sad that there is a unique default for all cameras (ONVIF) which is supported by QNAP and then its not working for specific camera(s).
Hopefully there is a fix soon.
Best,
Paedy
- dolbyman
- Guru
- Posts: 35275
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: INSTAR ONVIF configuration (IN-9408)
Best to create a ticket..otherwise hoping for a fix is silly (QNAP does not come here..how would they kmow?)
-
- New here
- Posts: 3
- Joined: Mon Nov 07, 2022 10:43 pm
Re: INSTAR ONVIF configuration (IN-9408)
Hello Paedy,
with version 2.3.0.0313 QNAP introduced support for IN-9408. Even though I am not able to configure my camera.
Did you manage to configure the camera?
QVR Pro 2.3.0.0313
( 2022/11/19 )
(...)
[New Features]
- Updated the compatibility list with camera models listed below:
- Instar IN-9408
(...)
Regards,
Stefan
with version 2.3.0.0313 QNAP introduced support for IN-9408. Even though I am not able to configure my camera.
Did you manage to configure the camera?
QVR Pro 2.3.0.0313
( 2022/11/19 )
(...)
[New Features]
- Updated the compatibility list with camera models listed below:
- Instar IN-9408
(...)
Regards,
Stefan
Paedy wrote: ↑Sat Nov 12, 2022 12:35 am Hello,
I have the same issue now.
Installed the INSTAR IN-9408 2k+ now and was happy that everything works - until I opened the QNAP Surveillance Station.
Then I saw that its possible to search for cameras so I selected ONVIF and it shows me all my old cameras but not the new one.
And all of them supporting ONVIF.
Then I tried to configure by myself with ONVIF. It says sometimes the IP Address cant be reached - but the PING TEST is successful.
I tought then it could work because the ONVIF "Test" Button says then a picture of a placeholder (camera) with a green check mark.
But if I want to view the camera its not working.
Very sad that there is a unique default for all cameras (ONVIF) which is supported by QNAP and then its not working for specific camera(s).
Hopefully there is a fix soon.
Best,
Paedy
-
- First post
- Posts: 1
- Joined: Thu Dec 01, 2022 7:28 am
Re: INSTAR ONVIF configuration (IN-9408)
Hello,
Instar has provided a new firmware update (version 1.2.0). After the update, the ONVIF and RTSP can be enabled under the network settings of IN-9408.
In the camera setup under QVR Pro (2.3.0.0313), select the INSTAR IN-9408 model and enter 8080 as port and 554 for RTSP.
Then it should work
Regards
Instar has provided a new firmware update (version 1.2.0). After the update, the ONVIF and RTSP can be enabled under the network settings of IN-9408.
In the camera setup under QVR Pro (2.3.0.0313), select the INSTAR IN-9408 model and enter 8080 as port and 554 for RTSP.
Then it should work
Regards
-
- New here
- Posts: 3
- Joined: Mon Nov 07, 2022 10:43 pm
Re: INSTAR ONVIF configuration (IN-9408)
Hello,
thank you very much, I'll give it a try.
Still I won't find my camera scanning my network.
And setting up manually the connection test fails.
Did anyone succeed?
Regards
Stefan
thank you very much, I'll give it a try.
Still I won't find my camera scanning my network.
And setting up manually the connection test fails.
Did anyone succeed?
Regards
Stefan