Motion Detection on demand

QVR Pro, QVR Pro Client, QVR Center and Surveillance Station
Post Reply
swettdj
Starting out
Posts: 13
Joined: Thu Aug 28, 2014 4:05 pm

Motion Detection on demand

Post by swettdj »

Hello, I would know if it's possible to enable motion detection manually from Vmobile app and from Surveillance Station.

Thank you.
User avatar
dolbyman
Guru
Posts: 35024
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Motion Detection on demand

Post by dolbyman »

how is manual motion detection supposed to work?

or what do you mean?
swettdj
Starting out
Posts: 13
Joined: Thu Aug 28, 2014 4:05 pm

Re: Motion Detection on demand

Post by swettdj »

I mean that my ip camera always turned on and I would enable motion detection only when I go out from my house.

From ip camera web administration page I can enable/disable motion detection and the same I can do from mobile app, so I would know if Vmobile app provide the same opportunity.

Thank you.
User avatar
dolbyman
Guru
Posts: 35024
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Motion Detection on demand

Post by dolbyman »

you could unclick the option "enable alarm recordings" or "start recording when motion is detected" .. both are available on the web frontend ..not sure about the app
Ephreal
Starting out
Posts: 25
Joined: Fri Jun 09, 2017 11:53 pm

Re: Motion Detection on demand

Post by Ephreal »

you could use a schedule to control when to capture/handle motion detection
sanjoh74
New here
Posts: 2
Joined: Sun Aug 13, 2017 9:49 pm

Re: Motion Detection on demand

Post by sanjoh74 »

Hi, this is a question i'm also intersted in. A schedule is good, for example my cameras is enabled for motion detection between 11 p.m to 6 a.am every day, but when I am away I want to easily update that to 24/7. The best opportunity would be if there is an app-function where you can activate motion detection.
Post Reply

Return to “Surveillance Solution”