QNAP NAS Community Forum

Hi,
i've got 2 Wanscam HW0036 camera's which are working fine through wiFi, with the Wanscam app, and also through a browser on my laptop.
Made some portforwards on my modem, and i can even connect to them from the world wide web now.
But now i want both cam's working in Surveillance station, when i connect them using ONVIF (which both cams should be ok with) i dont get any video (a black screen, see attachment.)
when i press the test button, i get the message the user ID or password is wrong. but im sure the are ok, since i can connect to them through my browser..
can anybody help me out with working settings for this type of camera?

I suspect that you have the 'ONVIF port' set incorrectly - is it really 81, or is that the HTTP port?
Check out the details for the camera with 'ONVIF Device Manager' from sourceforge.net
The ONVIF port is in the URL at the bottom of the Identification page.

i cant configure the onvif port on the camera (i attached a new screenshot), so i assumed it was the same as the HTTP-port, 81 indeed.
When im back home ill do a port scan to see if there are any other ports open on the IP cam. ánd check for the ONVIF devide manager, thanks for your help!

couldnt get the ONVIF port working right. i read somehweren the onvif build in this camera wasnt really one that worked well if you wanted to record it.
so i configured it using RTSP now.