EZVIZ Camera Compatibility

QVR Pro, QVR Pro Client, QVR Center and Surveillance Station
Post Reply
rickorford
First post
Posts: 1
Joined: Fri Dec 14, 2018 7:59 pm

EZVIZ Camera Compatibility

Post by rickorford » Tue Apr 09, 2019 8:11 pm

Hi,
I have an EZVIZ C6TC camera.

At the moment, I *can* get it to connect/record by using the "Generic camera" brand, and putting in RTSP/user/pass. Problem is, I cannot select alarm based recording (its grey'd out, see attached).

Thoughts?
-Rick
You do not have the required permissions to view the files attached to this post.

AlastairStevenson
Experience counts
Posts: 2122
Joined: Wed Jan 08, 2014 10:34 pm

Re: EZVIZ Camera Compatibility

Post by AlastairStevenson » Fri Apr 12, 2019 5:34 am

At the moment, I *can* get it to connect/record by using the "Generic camera" brand, and putting in RTSP/user/pass. Problem is, I cannot select alarm based recording (its grey'd out, see attached).
A couple of things you could try -
Try other Hikvision models, and ignore the 'model name mismatch' diagnostic.
Also try connecting it as an ONVIF camera, if that model supports it.
TS-431+ as primary storage and media server and a bunch of IP cams under Surveillance Station.

tankalf
New here
Posts: 2
Joined: Fri May 27, 2011 1:49 am

Re: EZVIZ Camera Compatibility

Post by tankalf » Sun Jun 16, 2019 7:26 pm

Hi guys.
I have some EzViz surveillance camera: EzViz EzCube Pro (CS-CV206 model) and EzViz Ez360 (CS-CV246 model).
Before to buy a Qnap Nas to record their surveillance streams, I would like to understand if they are compatible with Qnap Surveillance Monitor system.
I want only to record 24/7 stream, without motion detection, I don't need this.
Can you please help me?

Thanks a lot.

Post Reply

Return to “Surveillance Solution”