[TS251+] Surveillance QVR tutorial

QVR Pro, QVR Pro Client, QVR Center and Surveillance Station
Post Reply
stanzani
Starting out
Posts: 38
Joined: Fri Mar 17, 2017 12:12 am

[TS251+] Surveillance QVR tutorial

Post by stanzani » Tue Apr 09, 2019 9:59 pm

I want to setup a simple (2 IP cameras) surveillance system and I cannot easy find a turial. I want to use free-of-charge stuff which operates smoothly and simply
Where should I start? In the app center I see QVR Center / Guard / Pro (I think I have to pay for this) and finally the Surveillance Station
Please advise how to start or address me to a tutorial or wiki from Qnap
Firmware rev. 4.3.3
Thanks for your patience

yoyoman1234
Starting out
Posts: 30
Joined: Fri Mar 23, 2018 1:13 pm

Re: [TS251+] Surveillance QVR tutorial

Post by yoyoman1234 » Wed Apr 10, 2019 12:51 am

hi,

Just try QVR Pro, it is "FREE" for 8 channels recording.
QVRR Center is used for managing multiple QVR Pro, Surveillance Station or QVR 5.1 servers.

Get the user manual from the app center or the following link:
https://download.qnap.com/Surveillance/ ... Manual.zip

however, make sure your NAS meets the basic system requirements
https://www.qnap.com/solution/qvr-pro-official/en/

User avatar
andersoncheng
Getting the hang of things
Posts: 71
Joined: Mon Dec 25, 2017 10:48 am
Contact:

Re: [TS251+] Surveillance QVR tutorial

Post by andersoncheng » Sat May 18, 2019 6:46 pm

add QVR Pro FAQ for reference:
https://www.qnap.com/en/how-to/faq/qvr-pro

stanzani
Starting out
Posts: 38
Joined: Fri Mar 17, 2017 12:12 am

Re: [TS251+] Surveillance QVR tutorial

Post by stanzani » Mon May 27, 2019 8:42 pm

OK thanks
I did some homework. I read the manual package but I'd like to get a step-by-step guide / tutorial / app note for setting up a system which records just whenever ther is motion in the camera range. I am trying to add an event but I get confused by the menu presented by QVR (rules, thresholds etc.)
I find the manual describes the menus very well but lacks of examples
I see both qvi and mp4 files are stored in the recording storage. How can I have just one formati?
Thanks for your help

User avatar
andersoncheng
Getting the hang of things
Posts: 71
Joined: Mon Dec 25, 2017 10:48 am
Contact:

Re: [TS251+] Surveillance QVR tutorial

Post by andersoncheng » Mon Jun 24, 2019 5:11 pm

How to Begin Recording on Event Detection in QVR Pro
https://buildyoss.blogspot.com/2019/06/ ... event.html

Post Reply

Return to “Surveillance Solution”