I am looking to test QVR Pro on my TVS-471, along with the QVR Pro Client, for Windows.
Is it possible to install the QVR Pro App on my NAS, even though surveillence staion is installed and running, and be able to access the client on windows?
Would i need to set up another storage pool for QVR Pro, seperate from my surveillence staion pool?
Run QVR Pro and Surveillence Station Side by Side
-
blah76767
- New here
- Posts: 2
- Joined: Thu Jun 13, 2019 6:35 pm
-
rafale
- Easy as a breeze
- Posts: 350
- Joined: Tue May 12, 2015 1:53 pm
Re: Run QVR Pro and Surveillence Station Side by Side
Nothing in the software prevents you from doing this. There is no need for another storage pool either as both software can allocate their storage within the same pool.
The only limitation is your CPU usage and storage pool size which you need to have size big enough for your needs. I personally run both at the same time.
The only limitation is your CPU usage and storage pool size which you need to have size big enough for your needs. I personally run both at the same time.
Server: TVS-872XT i9 9900 ES, 64GB DDR4 2666MHz, intel X550-T2, Asus RTX3070 Dual OC (On pico PSU), 2x Phison E12 1TB M.2, 4x Micron 5210 7.68TB, 4x WD Purple 4TB
Backup NAS: TS-473 20GB DDR4 2400MHz, Mellanox ConnectX3, 2x Samsung PM871b 256GB M.2, 4x WD Red 8TB
Former units: TVS-1282, TS-871, TS-469
Backup NAS: TS-473 20GB DDR4 2400MHz, Mellanox ConnectX3, 2x Samsung PM871b 256GB M.2, 4x WD Red 8TB
Former units: TVS-1282, TS-871, TS-469
-
caravanboy
- Starting out
- Posts: 17
- Joined: Wed Sep 20, 2017 5:37 am
Re: Run QVR Pro and Surveillence Station Side by Side
I ran them side by side on a TS=251+ for months with no issues.