advice on IR illumination
-
Beemer2
- Easy as a breeze
- Posts: 331
- Joined: Sat Oct 17, 2015 12:22 am
- Location: Scotland
advice on IR illumination
I have a problem where it appears that the IR illumination of my Dahua cameras illuminating the camera mount wall is resulting in the main area of interest being severely underexposed. How best can I correct this?
TS-473A, 32GB, 4x4TB, Raid5, 12GB Red Plus backup
-
AlastairStevenson
- Experience counts
- Posts: 2415
- Joined: Wed Jan 08, 2014 10:34 pm
Re: advice on IR illumination
The best way is to orient the camera such that the bright wall is not in the field of view.How best can I correct this?
TS-431+ for storage and media and a bunch of IP cams under Surveillance Station. TVS-473 as files backup and QVR Pro.
-
Beemer2
- Easy as a breeze
- Posts: 331
- Joined: Sat Oct 17, 2015 12:22 am
- Location: Scotland
Re: advice on IR illumination
Yes I realised that and did try turning the camera 90 degrees. However I cannot find a way to get QVR Pro to rotate that same 90 degrees to view the image upright.
TS-473A, 32GB, 4x4TB, Raid5, 12GB Red Plus backup
-
AlastairStevenson
- Experience counts
- Posts: 2415
- Joined: Wed Jan 08, 2014 10:34 pm
Re: advice on IR illumination
I was thinking of a pan and tilt movement as opposed to a rotate.
TS-431+ for storage and media and a bunch of IP cams under Surveillance Station. TVS-473 as files backup and QVR Pro.