Reolink RLC-511W support?

QVR Pro, QVR Pro Client, QVR Center and Surveillance Station
Post Reply
First post
Posts: 1
Joined: Fri Jul 26, 2019 12:29 pm

Reolink RLC-511W support?

Post by nvmaxx » Fri Jul 26, 2019 12:34 pm

Figured since surveillance station supports RLC-511 camera wireless version shouldn't be much of a issue, so far I'm wrong, setting up SS, it sees the device on scanning and using ONVIF but then it fails to test with connection failed. The IP address is invalid, this is after it finds the camera on its own.

Any chance anyone happened to get this working and how ?

Thanks again.

User avatar
Been there, done that
Posts: 762
Joined: Wed Mar 07, 2018 11:04 pm
Location: 3rd World

Re: Reolink RLC-511W support?

Post by spikemixture » Sat Jul 27, 2019 7:35 pm

I have bought 2 Reolink, 3 Amcrest and 4 Foscam over the last 2-3 years costing from $50 to $200.
I use QVR pro and Blue Iris

I will not being buying reolink again
Qnap TS-1277 1700 (48gb RAM) 6x8TB WD White, 2x8TB WD Red - Raid5, 2x M.2 Crucial 1TB (Raid 1 VM),
2x SSD 860 EVO 500gb (Raid1 QTS), 2x SSD 860 EVO 250GB (Cache), 2x M.2 PCIe 970 500gb NVME (Raid1 Plex and Emby server)
GTX 1050 TI
Qnap TVS-1282 i7 (32GB RAM) 8x10TB WD White - Raid 6, 2x M.2 Crucial 500gb (Raid1 VM),
2x SSD EVO 500gb (Raid1 QTS), 2x SSD EVO 250gb (Raid1 Cache), 2x M.2 PCIe Intel 512GB NVME (Raid1-Servers)
Synology -1817+ - 2x10,2x8,2x6 (Ironwolf) 2x6 (WD Red) - SHR
Drobo 5n - 3x2TB WD Green, 2x3TB WD Red - Drobo Raid
Buffalo LinkStation - 2x2TB WD
ProBox 8 Bay USB3 - 8x4TB Seagate - JBOD
All software is updated asap.
I give my opinion from my experience i.e. I have (or had) that piece of equipment/software and used it! :roll:

Experience counts
Posts: 2170
Joined: Wed Jan 08, 2014 10:34 pm

Re: Reolink RLC-511W support?

Post by AlastairStevenson » Sun Jul 28, 2019 4:27 am

Maybe worth checking out some user experiences here :
TS-431+ as primary storage and media server and a bunch of IP cams under Surveillance Station.

Post Reply

Return to “Surveillance Solution”