Hi,
i try to connect an D-Link DCS-936L (from the compatibility list) to the SS or QVR pro, buit have the "still connecting"-problem. See attachments.
The cam works fine over WiFi in my browser an i get "TEST OK" and a positive ping result in SS and QVR. But no picture in this applications.
UPNP and forwarding is set (TCP 80, 443, 554) and the ip configuration is correct.
I tried the workaround with 15 FPS and lower resolutions, but nothing works.
I tried the cam as exposed host, nothing changes.
QTS: 4.3.6.0093
QVR pro: 1.2.1.4
SS: 5.1.3.4.5
DCS-936L: 1.08.03
Any ideas?
Thx in advance,
Mr. Manic
Survellance Station / QVR Pro not connecting D-Link DCS-936L
-
- New here
- Posts: 6
- Joined: Mon Jan 27, 2014 9:01 pm
Survellance Station / QVR Pro not connecting D-Link DCS-936L
You do not have the required permissions to view the files attached to this post.
QNAP TS-453pro, 8 GB, 4x4TB WD Red
-
- New here
- Posts: 6
- Joined: Mon Jan 27, 2014 9:01 pm
Re: Survellance Station / QVR Pro not connecting D-Link DCS-936L
Hello everybody,
after contacting the QNAP Support, the workaround was going back to firmware v1.05.07 on the DCS-936L, because all newer ones having issues.
Now it works fine. Thanx to the QNAP Support (was really fast).
Hope that'll help someone else.
Best regards,
Mr. Manic
after contacting the QNAP Support, the workaround was going back to firmware v1.05.07 on the DCS-936L, because all newer ones having issues.
Now it works fine. Thanx to the QNAP Support (was really fast).
Hope that'll help someone else.
Best regards,
Mr. Manic
QNAP TS-453pro, 8 GB, 4x4TB WD Red