Hikvision DS-2CD2365G1-I QVR Pro question

QVR Pro, QVR Pro Client, QVR Center and Surveillance Station
Post Reply
pixeluk
New here
Posts: 9
Joined: Wed Sep 08, 2010 7:51 pm

Hikvision DS-2CD2365G1-I QVR Pro question

Post by pixeluk » Fri Sep 06, 2019 5:51 pm

Running QVR Pro 1.2 version 1.2.1.5 (20190729)

Would like to add the following Hikvision cameras:

DS-2CD2365G1-I f/w v5.5.83 (190221) - I haven't updated this one yet in case it matters
DS-2CD2385G1-I f/w v5.6.2 (190701) - latest available

Both cameras are showing on the Qnap QVR Pro Compatibility list on the Qnap website which is encouraging.

I've tried to add via normal camera discovery but they don't show up.

I've tried to add manually but these particular models don't show up in the drop down list within QVR Pro

Following the excellent advice on this and other Forums I've made progress by:

On the Camera:
Enable ONVIF
Add a User Name with a Password, set to Level=Media user
Enable Hikvision-CGI, set to digest/basic

These camera settings allow a QVR Pro scan for the cameras to be discovered.

In QVR Pro:
Camera Settings: Selecting Brand=Generic Model, Camera Model=Generic RTSP, set the Port to match the HTTP Port on the camera, leave RTSP URL blank, set the Account and Password to match that set on the Camera

The above steps all finally achieved connectivity however it doesn't feel as though this is the optimum setup for these cameras.

I have to admit I'm a bit of a novice at this and am extremely grateful to the advice of others on this and other related Forums to achieve at least a starting camera connection.

Could those with a better understanding of QVR Pro/Hikvision cameras comment on this setup and advise on what I should change to improve the overall functionality.

As mentioned above neither of these cameras appear in the Camera Settings Manual setup by selecting Hikvision brand and looking for the specific model - is this an update that Qnap need to undertake within QVR Pro or some online database?

Thank you on advance for any contribution and advice.

pixeluk
New here
Posts: 9
Joined: Wed Sep 08, 2010 7:51 pm

Re: Hikvision DS-2CD2365G1-I QVR Pro question

Post by pixeluk » Sat Sep 07, 2019 2:16 am

As a follow up I now see the limitations of the Generic RTSP setup.

So whilst it is great to have some sort of functionality it is far from ideal.

I'll raise a Qnap Support Ticket and post any update here for the benefit of others who have a similar problem.

pixeluk
New here
Posts: 9
Joined: Wed Sep 08, 2010 7:51 pm

Re: Hikvision DS-2CD2365G1-I QVR Pro question

Post by pixeluk » Tue Sep 10, 2019 1:32 am

An update for the benefit of others with the same cameras.

Qnap Support have provided an updated Camera Package that once installed allowed the selection of these two cameras from the drop down lists when running through the camera setup again.

I now appear to have proper functionality of these cameras – so far so good.

Post Reply

Return to “Surveillance Solution”