After the QVR Pro update to 1.3.0.0, QVR Pro would not start because it was not on an SSD Raid group. I ran out and bought a matching SSD drive, and migrated the drive QVR Pro was on to a Raid 1. QVR Pro would still not run, so I removed it and reinstalled. Now it wants to set up, but it is saying not all requirements are met "SSD RAID group (not including RAID 0) not yet created." I do not understand, QVR Pro is installed on a Raid 1 SSD Group. What else does it need?
Ticket #Q-201909-27217
Cannot Set Up QVR Pro because SSD Raid Group not created yet
-
- New here
- Posts: 9
- Joined: Tue Aug 02, 2016 5:30 am
Cannot Set Up QVR Pro because SSD Raid Group not created yet
Last edited by Eulogium on Tue Sep 17, 2019 12:02 pm, edited 2 times in total.
-
- Starting out
- Posts: 18
- Joined: Sun Feb 11, 2018 11:39 pm
-
- Starting out
- Posts: 18
- Joined: Sun Feb 11, 2018 11:39 pm
Re: Cannot Set Up QVR Pro because SSD Raid Group not created yet
PS. Follow i link in beta thread to revert back to older version. Got mine to work again that way.
-
- New here
- Posts: 9
- Joined: Tue Aug 02, 2016 5:30 am
Re: Cannot Set Up QVR Pro because SSD Raid Group not created yet
Yup, downgraded as well. At least my settings were backed up.
-
- New here
- Posts: 9
- Joined: Tue Aug 02, 2016 5:30 am
Re: Cannot Set Up QVR Pro because SSD Raid Group not created yet
I was able to get 1.3 running by installing both SSDs in the 2.5" bays.