rtsp stream from NVR to enigma 2 Linux decoder

[Lieven Borms]

Dear,


In our network, a VS-8124UPro+ NRV is installed.
Everything works fine but we like to use this device a little bit more.

The network contains multiple enigma 2 Linux satellite decoders which are capable to receive IP-streams.
So on this decoders I like to see the real time video from the NVR but I don’t know how to achieve this.

I’ve noticed some Qnap NAS devices are capable to do this by using the following link: rtsp://[QNAP Turbo NAS IP address]:554/channel[QUSBCam2 channel number]
Unfortunately this format of url doesn’t work for our Qnap NVR.

I did some test directly to a Hikvision IP camera, which is also connected to the NVR, using the following link: rtsp://[Camera IP address]:554//Streaming/Channels/1
This setup works fine so I’m sure that the problem isn’t caused by the decoder or other hardware.

Is it possible to receive a stream on the enigma 2 decoders and how can I do this?


Best regards,


PS:
Sorry that I need to place my post here.
The NVR forum is not accessible on http://forum.qnapsecurity.com and I can’t find another forum.

[dolbyman]

opening a ticket with QNAP is probably a better idea