Page 1 of 1
QVR Pro can't change a cameras interface
Posted: Fri Jul 31, 2020 12:18 am
by RichJacot
I have QVR Pro 1.4.0.1.2 running on a QNAP 672N with two cameras. Everything has been running fine but I'd like to use the other interface I have live. When I go into the camera settings and click the network interface under Action, I can change one camera to the interface I want without issue. The other once just sits loading at the network interface assignment screen for a few minutes and times out back to the camera settings page. Anyone have any ideas what would be causing this?
TIA
Re: QVR Pro can't change a cameras interface
Posted: Fri Jul 31, 2020 1:34 pm
by spile
Are you using the correct configuration file? Ask Qnap if they have a better one via the camera plugin.
Re: QVR Pro can't change a cameras interface
Posted: Sun Nov 22, 2020 5:16 am
by uholmes
I'm running 1.4.0.3 on a 451+ and I have the EXACT same issue. I was able to modify camera 1, but camera 2 still sits at auto and it won't let me edit it.
Re: QVR Pro can't change a cameras interface
Posted: Sun Nov 22, 2020 4:03 pm
by spile
See above comment about the camera plugin.
Open a service call.
Re: QVR Pro can't change a cameras interface
Posted: Sun Nov 22, 2020 8:23 pm
by uholmes
I'm 100% positive I'm using the correct file. I doubt that is the issue since both cameras are the same model and I was able to modify the first one.
Re: QVR Pro can't change a cameras interface
Posted: Sun Nov 22, 2020 8:24 pm
by uholmes
Ah, I just discovered something. It works if I try it from another computer. I'm using chrome on both, but when switched to Chrome on Mac vs Windows (where I made the initial change)....it works.