Reolink E1 Zoom with 12/11/2020 Firmware loop reboot

QVR Pro, QVR Pro Client, QVR Center and Surveillance Station
Post Reply
alaska99
Starting out
Posts: 18
Joined: Tue Oct 10, 2017 9:24 am

Reolink E1 Zoom with 12/11/2020 Firmware loop reboot

Post by alaska99 » Thu Apr 01, 2021 10:32 am

When I configure this camera in QVR Pro 2.0.0.1, the camera start a endless loop reboot. When I remove the camera in QVR Pro the loop stop and camera work right again.
TVS-873e
Vol 1: QM2-4P-384 card with 2 SSDs of 1Tb Raid 1
Vol 2: 6 disk HGST of 8TB 7200RPM Raid 5 pool Thick
2 Samsung SSD 860EVO 1 Tb Raid 1 for Qtier
32Gb RAM
Always latest QTS installed

AlastairStevenson
Experience counts
Posts: 2306
Joined: Wed Jan 08, 2014 10:34 pm

Re: Reolink E1 Zoom with 12/11/2020 Firmware loop reboot

Post by AlastairStevenson » Thu Apr 01, 2021 4:36 pm

Reolink camera firmware has a reputation for being quite buggy and not very interoperable.
Maybe check to see if there is a firmware update for the camera.
TS-431+ for storage and media and a bunch of IP cams under Surveillance Station. TVS-473 as files backup and QVR Pro.

alaska99
Starting out
Posts: 18
Joined: Tue Oct 10, 2017 9:24 am

Re: Reolink E1 Zoom with 12/11/2020 Firmware loop reboot

Post by alaska99 » Fri Apr 02, 2021 6:17 am

it s the latest firmware
TVS-873e
Vol 1: QM2-4P-384 card with 2 SSDs of 1Tb Raid 1
Vol 2: 6 disk HGST of 8TB 7200RPM Raid 5 pool Thick
2 Samsung SSD 860EVO 1 Tb Raid 1 for Qtier
32Gb RAM
Always latest QTS installed

dragerfroe
Starting out
Posts: 13
Joined: Sat Jul 21, 2018 5:58 am

Re: Reolink E1 Zoom with 12/11/2020 Firmware loop reboot

Post by dragerfroe » Mon Apr 05, 2021 3:15 am

I have a E1 5mp, and add it to QVR Pro as a ONVIF Profile S. I can only look at it and it is VERY slow. I would never recommend Reolink. I am in the market now for a 4k and looking at a real Hikvision.I have a knock off and the dang ONVIF **. I could go back to cheap JideTech 4k, I know their 1080p ONVIF works well.
NAS: QNAP Turbo NAS TS-870U-RP, 16 GB Ram
CPU Upgrade: Intel i7-2600S
System Fan Mod: AVC DE07015B12L 7CM 12V 0.3A 7015 AVC CPU (x2) Fan to reduce Motherboard fan noise - (easy drop in)
PSU Fan Mod: SUNON HA40201V4-000U-999 4cm Super-silent Fan Magnetic (X2) - (modded each power supply myself, some soldering, but easy mod)

Post Reply

Return to “Surveillance Solution”