Page 1 of 1
Reolink E1 Zoom with 12/11/2020 Firmware loop reboot
Posted: Thu Apr 01, 2021 10:32 am
by alaska99
When I configure this camera in QVR Pro 2.0.0.1, the camera start a endless loop reboot. When I remove the camera in QVR Pro the loop stop and camera work right again.
Re: Reolink E1 Zoom with 12/11/2020 Firmware loop reboot
Posted: Thu Apr 01, 2021 4:36 pm
by AlastairStevenson
Reolink camera firmware has a reputation for being quite buggy and not very interoperable.
Maybe check to see if there is a firmware update for the camera.
Re: Reolink E1 Zoom with 12/11/2020 Firmware loop reboot
Posted: Fri Apr 02, 2021 6:17 am
by alaska99
it s the latest firmware
Re: Reolink E1 Zoom with 12/11/2020 Firmware loop reboot
Posted: Mon Apr 05, 2021 3:15 am
by dragerfroe
I have a E1 5mp, and add it to QVR Pro as a ONVIF Profile S. I can only look at it and it is VERY slow. I would never recommend Reolink. I am in the market now for a 4k and looking at a real Hikvision.I have a knock off and the dang ONVIF **. I could go back to cheap JideTech 4k, I know their 1080p ONVIF works well.