DLink DCS-2121 in the TS-110 Turbo NAS

[koubiak]

Hello, here's how to configure the DSC-2121 in the TS-110 Turbo NAS.

Configuring a D-Link DCS-2121 on a TS-110 Turbo NAS.

First step, enter the configuration page of TS-110 Turbo NAS to activate or verify that the monitoring station is activated ...

Click on "Administration"

The login window appears and enter the IDs of Directors.

Check or activate the monitoring station.

Do not forget to "apply" if the monitoring station was not activated.

Second step, configuring the DCS-2121 in the monitoring station.

Click on "Monitoring Station"

Login as "Administrator"

Once connected to the monitoring station click "Settings"

Click on "Camera 1"

Camera Model: "Generic JPEG"
URL http: "video / mjpg.cgi"
Name of the camera: "DCS-2121 as an example"
IP Address: "192.168.0.20 by example "
Port: "65001 in such otherwise leave the default "
Name and password "admin" and "xxxxxxxxxx" and Apply!

And click "Test! "

Here is the TS-110 Turbo NAS to configure, you can schedule recordings from the menu "Program Settings" and "Advanced Settings"

You can:
• Delete records after X days
• Keep records of alarm for at least X days
• When the available storage is less than X GB
o Overwrite the oldest records
Where
o Stop writing records
• Maximum length of each recording file X minutes

Bye.

[bantan]

Thank you for your effort. Unfortunately l still have a problem. via IP I can access the 2121 through its interface no problem.

The "test" gives me a Server error -5 and in Live view I get a server error 6
:400. in the main screen i get a camera with an ok hook, but bo preview

I am running it on a ts109 II pro with fw 3.01
any ideas?
Raoul

[bantan]

ok, i got it to work without the motion detection though

/video/mjpg.cgi?profileid=1

is what i used.

but without motion detection, it is pretty useless to me