Y-CAM Generic V2

[brieno]

Hi All,

After recently purchasing the TS-419P, and the Y-Cam Black from the IP-Camera Compatibility list, I know notice that
in the build notes of the latest release, that it's effectively not working.
There's no Live View, and I can't record.

This seems to be present for the past few months..
I've upgraded the Y-Cam and the QNAP to the latest revisions of firmware as of Sept 6th 2010, and I can't get the Y-Cam to work.

Is this fix in progress, or is there an ETA for it if the fix is outside of QNAP's control, e.g. reliance on Y-Cam to provide driver etc.

==================================
[Known Issues]
- [Surveillance Station] Y-CAM Generic V2 will be disconnected when selecting the channel in Live View page.
==================================

Thanks in advance,

Ronan.

P.S. In the meantime, the hardware compatibility guide could be updated to mention that Y-Cam does not currently work with the latest revision of QNAP firmware. I wouldnt have bought the Y-Cam if I knew there was an issue.