Windows 10 mapping refuses correct credentials
- storageman
- Ask me anything
- Posts: 5506
- Joined: Thu Sep 22, 2011 10:57 pm
Re: Windows 10 mapping refuses correct credentials
Go to Shared Folders, Edit Shared Folders Permissions. Then try the share, if you can get straight in it would prove if it is a permissions issue or SMB explorer share access not working at all.
Once you've tested this disable Guest access
Once you've tested this disable Guest access
You do not have the required permissions to view the files attached to this post.
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: Windows 10 mapping refuses correct credentials
Post screen shots of your permissions screen.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
-
- Getting the hang of things
- Posts: 91
- Joined: Thu May 24, 2012 4:29 pm
Re: Windows 10 mapping refuses correct credentials
For testing purposes I took a currently unused share folder, mp3, and made guest access full. I was then able to map a drive letter to that, and can read and write to it. All folders that have guest access denied will not map.storageman wrote:Go to Shared Folders, Edit Shared Folders Permissions. Then try the share, if you can get straight in it would prove if it is a permissions issue or SMB explorer share access not working at all.
You do not have the required permissions to view the files attached to this post.
-
- Getting the hang of things
- Posts: 91
- Joined: Thu May 24, 2012 4:29 pm
Re: Windows 10 mapping refuses correct credentials
For comparison with mp3 screen, which allows drive mapping. "Anne" returns "Access denied"Don wrote:Post screen shots of your permissions screen.
You do not have the required permissions to view the files attached to this post.
- Spider99
- Experience counts
- Posts: 1951
- Joined: Fri Oct 21, 2011 11:14 pm
- Location: UK
Re: Windows 10 mapping refuses correct credentials
Is your windows account "anne" or "Anne"?
Tim
TS-853A(16GB): - 4.3.4.0483 - Static volume - Raid5 - 8 x 4TB HGST Deskstar NAS
Windows Server + StableBit Drivepool and Scanner ~115 TB Backup Server
TS-412 & TS-459 Pro II: Retired
Clients: 3 x Windows 10 Pro(64bit)
TS-853A(16GB): - 4.3.4.0483 - Static volume - Raid5 - 8 x 4TB HGST Deskstar NAS
Windows Server + StableBit Drivepool and Scanner ~115 TB Backup Server
TS-412 & TS-459 Pro II: Retired
Clients: 3 x Windows 10 Pro(64bit)
-
- Getting the hang of things
- Posts: 91
- Joined: Thu May 24, 2012 4:29 pm
Re: Windows 10 mapping refuses correct credentials
Anne - and, on checking, I find that my NAS account is anne. Windows, of course, doesn't know the difference. All the same, I have tried several times to use the name "anne" with the password, without success.
- Spider99
- Experience counts
- Posts: 1951
- Joined: Fri Oct 21, 2011 11:14 pm
- Location: UK
Re: Windows 10 mapping refuses correct credentials
delete the anne account and remake with Anne
so if that solves you issue?
so if that solves you issue?
Tim
TS-853A(16GB): - 4.3.4.0483 - Static volume - Raid5 - 8 x 4TB HGST Deskstar NAS
Windows Server + StableBit Drivepool and Scanner ~115 TB Backup Server
TS-412 & TS-459 Pro II: Retired
Clients: 3 x Windows 10 Pro(64bit)
TS-853A(16GB): - 4.3.4.0483 - Static volume - Raid5 - 8 x 4TB HGST Deskstar NAS
Windows Server + StableBit Drivepool and Scanner ~115 TB Backup Server
TS-412 & TS-459 Pro II: Retired
Clients: 3 x Windows 10 Pro(64bit)
-
- Getting the hang of things
- Posts: 91
- Joined: Thu May 24, 2012 4:29 pm
Re: Windows 10 mapping refuses correct credentials
I despair! No, it didn't solve the issue. Attempting to map to DataFromBorg now returns the following
You'll note that Anne has appeared in Network Locations, but it's Anne on this laptop!
It's lies - all lies! You'll note that Anne has appeared in Network Locations, but it's Anne on this laptop!
You do not have the required permissions to view the files attached to this post.
- Spider99
- Experience counts
- Posts: 1951
- Joined: Fri Oct 21, 2011 11:14 pm
- Location: UK
Re: Windows 10 mapping refuses correct credentials
Actually thats better than before as its trying to connect
Go back and delete any credentials you have in windows related to the nas again - and unmap any old mappings even the z: for know - then reboot to clear out etc
Then try and reconnect to the nas (you are close now) - i assume the new Anne user on the nas has permissions for the share you are trying to access?
I assume drive z is not on the nas?
As for Anne appearing on your network - you have homehub enabled? so not a problem click on it and you will get shares off the laptop - the Anne bit is your username and () name of pc
Go back and delete any credentials you have in windows related to the nas again - and unmap any old mappings even the z: for know - then reboot to clear out etc
Then try and reconnect to the nas (you are close now) - i assume the new Anne user on the nas has permissions for the share you are trying to access?
I assume drive z is not on the nas?
As for Anne appearing on your network - you have homehub enabled? so not a problem click on it and you will get shares off the laptop - the Anne bit is your username and () name of pc
Tim
TS-853A(16GB): - 4.3.4.0483 - Static volume - Raid5 - 8 x 4TB HGST Deskstar NAS
Windows Server + StableBit Drivepool and Scanner ~115 TB Backup Server
TS-412 & TS-459 Pro II: Retired
Clients: 3 x Windows 10 Pro(64bit)
TS-853A(16GB): - 4.3.4.0483 - Static volume - Raid5 - 8 x 4TB HGST Deskstar NAS
Windows Server + StableBit Drivepool and Scanner ~115 TB Backup Server
TS-412 & TS-459 Pro II: Retired
Clients: 3 x Windows 10 Pro(64bit)
-
- Getting the hang of things
- Posts: 91
- Joined: Thu May 24, 2012 4:29 pm
Re: Windows 10 mapping refuses correct credentials
There were no saved credentials for the nas, but I rebooted anyway, just in case.Spider99 wrote:Actually thats better than before as its trying to connect
Go back and delete any credentials you have in windows related to the nas again - and unmap any old mappings even the z: for know - then reboot to clear out etc
Yes, all relevant directories are 770. Unfortunately, I still get Access Denied.Then try and reconnect to the nas (you are close now) - i assume the new Anne user on the nas has permissions for the share you are trying to access?
Z: was the test mapping to a directory where guest had been given full access. It's now deleted.I assume drive z is not on the nas?
Yes, I understood that, but was momentarily confused. Checking the Details entry though said it was a media server, so I assumed it was safe to ignore it, at least for the present.As for Anne appearing on your network - you have homehub enabled? so not a problem click on it and you will get shares off the laptop - the Anne bit is your username and () name of pc
- Spider99
- Experience counts
- Posts: 1951
- Joined: Fri Oct 21, 2011 11:14 pm
- Location: UK
Re: Windows 10 mapping refuses correct credentials
Let try something different
create a new share on your nas
Assign Anne to it as read write - dont - assign any other user or group just Anne
Can you connect?
create a new share on your nas
Assign Anne to it as read write - dont - assign any other user or group just Anne
Can you connect?
Tim
TS-853A(16GB): - 4.3.4.0483 - Static volume - Raid5 - 8 x 4TB HGST Deskstar NAS
Windows Server + StableBit Drivepool and Scanner ~115 TB Backup Server
TS-412 & TS-459 Pro II: Retired
Clients: 3 x Windows 10 Pro(64bit)
TS-853A(16GB): - 4.3.4.0483 - Static volume - Raid5 - 8 x 4TB HGST Deskstar NAS
Windows Server + StableBit Drivepool and Scanner ~115 TB Backup Server
TS-412 & TS-459 Pro II: Retired
Clients: 3 x Windows 10 Pro(64bit)
-
- Getting the hang of things
- Posts: 91
- Joined: Thu May 24, 2012 4:29 pm
Re: Windows 10 mapping refuses correct credentials
Yes - mapped to Z:.
- Toxic17
- Ask me anything
- Posts: 6482
- Joined: Tue Jan 25, 2011 11:41 pm
- Location: Planet Earth
- Contact:
Re: Windows 10 mapping refuses correct credentials
So now you need to setup permissions on the Shared folder to give the user access.
Regards Simon
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
-
- Getting the hang of things
- Posts: 91
- Joined: Thu May 24, 2012 4:29 pm
Re: Windows 10 mapping refuses correct credentials
Not sure what you mean here. The existing shared folders are all read/write for me, but also read only for family members - admin has rw of course. Are you advising me to make changes to one of these folders? If so, what exactly?Toxic17 wrote:So now you need to setup permissions on the Shared folder to give the user access.
- Toxic17
- Ask me anything
- Posts: 6482
- Joined: Tue Jan 25, 2011 11:41 pm
- Location: Planet Earth
- Contact:
Re: Windows 10 mapping refuses correct credentials
Ok can you confirm when you goto map the folder from Windows 10 in Windows Explorer you are selecting "Connect using different credentials"
You do not have the required permissions to view the files attached to this post.
Regards Simon
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55