Cannot access NAS through File Explorer (Web ok)
-
- Starting out
- Posts: 22
- Joined: Mon May 28, 2012 8:38 am
Cannot access NAS through File Explorer (Web ok)
Ive recently upgraded from a TS259 Pro+ to a TS253be & now cannot access any folders through file explorer
I can access through web GUI, QFile (iOS) & myqnapcloud - everything worked fine before migrating to the new hardware. I am sure that there is just one silly little setting that's killing it, but for the life of me I cannot work out what.
Im running windows10,
TS-253be firmware 4.3.4.0644
checked user has permission to access the folders.
I can ping both IP & NAS name with zero loss
I have deleted and reset any credentials to access - the error appears to be occurring before credentials are checked.
Checked nil restrictions on IP or blocking for IP to access.
QFinder Pro 6.5.0 - "Network Drives" button does nothing & shows no error.
Error:
"Windows cannot access \\xxxxxx" [or \\xxx.xxx.xxx.xxx]
"Check the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnose".
The second error I get [after encrypting folders to allow remote access from QNAP Tech support]
"You cant connect to the file share because its not secure. This share requires the obsolete SMB1 protocol, which is unsafe and could expose your system to attack. Your system requires SMB2 or higher..."
Any thoughts?
I can access through web GUI, QFile (iOS) & myqnapcloud - everything worked fine before migrating to the new hardware. I am sure that there is just one silly little setting that's killing it, but for the life of me I cannot work out what.
Im running windows10,
TS-253be firmware 4.3.4.0644
checked user has permission to access the folders.
I can ping both IP & NAS name with zero loss
I have deleted and reset any credentials to access - the error appears to be occurring before credentials are checked.
Checked nil restrictions on IP or blocking for IP to access.
QFinder Pro 6.5.0 - "Network Drives" button does nothing & shows no error.
Error:
"Windows cannot access \\xxxxxx" [or \\xxx.xxx.xxx.xxx]
"Check the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnose".
The second error I get [after encrypting folders to allow remote access from QNAP Tech support]
"You cant connect to the file share because its not secure. This share requires the obsolete SMB1 protocol, which is unsafe and could expose your system to attack. Your system requires SMB2 or higher..."
Any thoughts?
- storageman
- Ask me anything
- Posts: 5507
- Joined: Thu Sep 22, 2011 10:57 pm
Re: Cannot access NAS through File Explorer (Web ok)
In Control Panel Win/Mac/NFS have you enabled SMB 3?
- master_sentinel
- Starting out
- Posts: 19
- Joined: Wed May 26, 2010 3:01 am
Re: Cannot access NAS through File Explorer (Web ok)
I just posted a similar issue to yourss
viewtopic.php?f=15&t=142464
I posted under Backup, but symptoms and problems are same as your, I'll watch you thread too :
viewtopic.php?f=15&t=142464
I posted under Backup, but symptoms and problems are same as your, I'll watch you thread too :
-
- Starting out
- Posts: 22
- Joined: Mon May 28, 2012 8:38 am
Re: Cannot access NAS through File Explorer (Web ok)
Solved!storageman wrote:In Control Panel Win/Mac/NFS have you enabled SMB 3?
Thank you kind sir
Why on earth that was the issue (& it took QNAP support over a week so far with no resolution!)
You would think that this would be default? I wonder why it was an issue when I migrated to the new qnap?
- storageman
- Ask me anything
- Posts: 5507
- Joined: Thu Sep 22, 2011 10:57 pm
Re: Cannot access NAS through File Explorer (Web ok)
I assume it inherited the settings which had only SMB 1.0!
-
- Starting out
- Posts: 22
- Joined: Mon May 28, 2012 8:38 am
Re: Cannot access NAS through File Explorer (Web ok)
I’ll check this out - interesting though that I had no issues with the TS259 Pro+ (I upgraded due to a faulty power connection & it was virtually the same price to replace the power/motherboard as to buy a new unit)storageman wrote:I assume it inherited the settings which had only SMB 1.0!
-
- Starting out
- Posts: 31
- Joined: Thu May 03, 2018 11:56 am
Re: Cannot access NAS through File Explorer (Web ok)
thanks, this fixed my nas after firmware 4.3.5.0760 update
-
- Starting out
- Posts: 11
- Joined: Sat Jan 05, 2013 6:12 pm
Re: Cannot access NAS through File Explorer (Web ok)
Thanks. This fixed my issue as well. For the benefit of others, in firmware 4.3.6.0923 the SMB setting is in Control Panel / Network and File Services / Microsoft Networking / Advanced Options / Highest SMB Version.
- Moogle Stiltzkin
- Guru
- Posts: 11448
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: Cannot access NAS through File Explorer (Web ok)
good tip. next time i see someone with this issue, i'll point them to this
when did they add a highest and lowest smb? i only recall being 1 smb selection at a time. is this new ?
whats the highest smb a ts-509 pro supports, 2.0 ? 2.1 ? not sure which lowest to add
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- Know my way around
- Posts: 103
- Joined: Fri Mar 17, 2017 12:12 am
Re: Cannot access NAS through File Explorer (Web ok)
I suffer the same issue for a vintage NAS TS219P using 4.3.3?
Is there any solution?
Thanks
Is there any solution?
Thanks
TS-531P Annapurna
- OneCD
- Guru
- Posts: 12144
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: Cannot access NAS through File Explorer (Web ok)
* topic locked to prevent further necroposting *