Can't Select CD Image/ISO
-
- Starting out
- Posts: 28
- Joined: Sat Feb 11, 2017 8:57 pm
Can't Select CD Image/ISO
Attempting to in stall a new Win 10 VM, every time I select an ISO I get the following error:
Specify a name that does not contain the following characters...
I have renamed the ISO multiple times without any special characters and tried other ISO, same errors, any ideas?
Thanks
Specify a name that does not contain the following characters...
I have renamed the ISO multiple times without any special characters and tried other ISO, same errors, any ideas?
Thanks
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: Can't Select CD Image/ISO
Insufficient information provided.
NAS model? NAS firmware version? ISO file name including full path? VS version? Full error message?
NAS model? NAS firmware version? ISO file name including full path? VS version? Full error message?
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
- dolbyman
- Guru
- Posts: 35253
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Can't Select CD Image/ISO
my bet would be also on the full path name
\\NAS\^^%109209";/.;[]\iso.iso will probably not work
\\NAS\^^%109209";/.;[]\iso.iso will probably not work
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: Can't Select CD Image/ISO
I just tried building a Win 10 VM and got the same error message. The file name was "Win 10 pro.iso". The error message clearly states that the path and file name cannot contain whitespace. I copied the file to the public folder (no spaces) and removed the spaces from the file name (Win10pro.iso) and it worked fine.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
-
- First post
- Posts: 1
- Joined: Thu Apr 02, 2015 7:31 pm
Re: Can't Select CD Image/ISO
Hi get the same error messages on my TS-453A : Specify a name that does not contain the following characters: ` * = + [ ] \ | ; : ' " , < > / ? % whitespace
Except !!! I do have also a TS-253A and in that system it still works fine.
Specifications:
TS-453A:
RAID 5 4x3 TB
Memory 16 GB
TS-253A:
RAID 0 2x3 TB
Memory 16 GB.
Both systems due have a virtual switch and I am also using a physical switch, with VLAN tagging etc.
Last but not least 2 physical firewalls : Check Point and Palo Alto
Everything worked fine, TILL the firmware upgrade...
Greetz Marco
The Netherlands
Except !!! I do have also a TS-253A and in that system it still works fine.
Specifications:
TS-453A:
RAID 5 4x3 TB
Memory 16 GB
TS-253A:
RAID 0 2x3 TB
Memory 16 GB.
Both systems due have a virtual switch and I am also using a physical switch, with VLAN tagging etc.
Last but not least 2 physical firewalls : Check Point and Palo Alto
Everything worked fine, TILL the firmware upgrade...
Greetz Marco
The Netherlands
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: Can't Select CD Image/ISO
Insufficient information provided.
How about answering the questions asked a few posts back.
NAS model? (provided) NAS firmware version? ISO file name including full path? VS version? Full error message? (provided)
How about answering the questions asked a few posts back.
NAS model? (provided) NAS firmware version? ISO file name including full path? VS version? Full error message? (provided)
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
-
- Starting out
- Posts: 12
- Joined: Wed Aug 08, 2012 2:22 am
Re: Can't Select CD Image/ISO
Hello
I get the same error messages on my TS-251 : Specify a name that does not contain the following characters: ` * = + [ ] \ | ; : ' " , < > / ? % whitespace
TS- 251
Firmware - 4.3.3.0210
RAM - 8 GB
I get the same error messages on my TS-251 : Specify a name that does not contain the following characters: ` * = + [ ] \ | ; : ' " , < > / ? % whitespace
TS- 251
Firmware - 4.3.3.0210
RAM - 8 GB
TS-251 - Intel 8GB , 2 x 3 TB TOSHIBA DT01ACA300 , Firmware 4.3
TS-220 ARM, 2 x 3 TB TOSHIBA DT01ACA300 , Firmware 4.2
http://www.oben.pl
TS-220 ARM, 2 x 3 TB TOSHIBA DT01ACA300 , Firmware 4.2
http://www.oben.pl
- dolbyman
- Guru
- Posts: 35253
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Can't Select CD Image/ISO
did you see Don's answer regarding posting full path and filename ?
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: Can't Select CD Image/ISO
I give up. Since no one is willing to provide the information requested please open a ticket with QNAP.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
-
- New here
- Posts: 2
- Joined: Fri Sep 23, 2016 8:48 pm
Re: Can't Select CD Image/ISO
I too am receiving the same error, did qnap support provide a fix?
Didn't encounter this issue until upgrading to QTS 4.3.3
TVS882
Didn't encounter this issue until upgrading to QTS 4.3.3
TVS882
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: Can't Select CD Image/ISO
Unable to assist since no one seems fit to post the requested information.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
-
- Starting out
- Posts: 12
- Joined: Wed Aug 08, 2012 2:22 am
Re: Can't Select CD Image/ISO
Problem solved. An error occurs when the access path is in a subfolder. Moving image.iso to the Public folder resolves the issue.
TS-251 - Intel 8GB , 2 x 3 TB TOSHIBA DT01ACA300 , Firmware 4.3
TS-220 ARM, 2 x 3 TB TOSHIBA DT01ACA300 , Firmware 4.2
http://www.oben.pl
TS-220 ARM, 2 x 3 TB TOSHIBA DT01ACA300 , Firmware 4.2
http://www.oben.pl
-
- New here
- Posts: 4
- Joined: Fri Sep 16, 2016 10:03 pm
Re: Can't Select CD Image/ISO
It seems, since the update to Virtual Station 3 this issue has occurred. Also you can create backup jobs now unless you remove all your VM's and create a new Share (sharename without any spaces e.g. VirtualMachines/VM) and this import them back into VS3.
QNAP Strikes again!!!!
QNAP Strikes again!!!!
- joelang1699
- Easy as a breeze
- Posts: 400
- Joined: Tue Feb 03, 2009 11:33 am
Re: Can't Select CD Image/ISO
Same issue
TS-EC1080 Fw 4.3.3.0262 Build 20170727
TS-EC1080 Fw 4.3.3.0262 Build 20170727
Regards
Joe
TVS-EC1080 32Gb Ram 10x WD60EFRX Raid 6
TS-1079 Pro 16Gb Ram 10x WD60EFRX Raid 6
TS-879 Pro 2Gb Ram 3 X WD60EFRX Raid 5
TVS-863 4Gb Ram 3 X WD60EFRX Raid 5
Joe
TVS-EC1080 32Gb Ram 10x WD60EFRX Raid 6
TS-1079 Pro 16Gb Ram 10x WD60EFRX Raid 6
TS-879 Pro 2Gb Ram 3 X WD60EFRX Raid 5
TVS-863 4Gb Ram 3 X WD60EFRX Raid 5
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Can't Select CD Image/ISO
VS changed the naming standards to no longer allow spaces. You can replace them with _'s
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq