Hi,
I wanted to get some configuration advice in regrads to Virtuatlization station.
I want to a qnap TS-251 - which has dual network ports and dual hard disks.
What I want to do is to use the virtualization station and have it be my
firwall appliance with using pfSense. So here is the config I want to go with
LAN devices <--> [NAS Device] <-- Internet
So I want to be able the lan devices to see the NAS and browse the internet.
The bit that is throwing me is how I to configure the Virtual switch.
So can this configuration work? And how can should I configure the Virtual Switch.
Any other advice greatly appreciated.
Thanks,
Ward.
Virtual Switch Advice?
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Virtual Switch Advice?
See this article:
https://trainingrevolution.wordpress.co ... ap-ts-251/
https://trainingrevolution.wordpress.co ... ap-ts-251/
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq