VMM / SMI can see only some LUN

QNAP NAS solution for server virtualization and clustering/HA/FT
Post Reply
lrbjor
New here
Posts: 2
Joined: Wed Sep 06, 2017 11:53 pm

VMM / SMI can see only some LUN

Post by lrbjor » Thu Sep 07, 2017 12:16 am

Hi,
Using QNAP SMI in VMM I can create new LUN's and use them on my cluster, and they are visible in VMM Storage.
But LUNs / iSCSI targets created via Qnap web interface is not visible in VMM Storage.

I can use the LUNS directly on my hosts, wherever I've created them.

A rescan from VMM does not help.
I have looked into iSCSI ACL, but no luck.

Ideas anyone?

User avatar
storageman
Experience counts
Posts: 4945
Joined: Thu Sep 22, 2011 10:57 pm

Re: VMM / SMI can see only some LUN

Post by storageman » Fri Sep 22, 2017 11:02 pm

Still an issue?
Works on mine. Point ISCSI Initiator in VM at NAS IP address.

lrbjor
New here
Posts: 2
Joined: Wed Sep 06, 2017 11:53 pm

Re: VMM / SMI can see only some LUN

Post by lrbjor » Fri Nov 10, 2017 11:23 pm

Thanks for replying. Yes, still an issue...
I have SCVMM -> SMI-S (on dedicated VM) -> NAS iSCSI IP
I'm using Windows 2016 and a TS 869 Pro Nas

Post Reply

Return to “Server Virtualization & Clustering”