QNAP with vsphere 6.5

QNAP NAS solution for server virtualization and clustering/HA/FT
Post Reply
Rene72
Getting the hang of things
Posts: 79
Joined: Thu Apr 23, 2015 3:36 pm

QNAP with vsphere 6.5

Post by Rene72 » Thu Oct 11, 2018 8:58 pm

Hi,

I am a little confused what to use/need to work with vsphere and qnap.

I have connected 3 iscsi luns to my vpshere box. I see that my qnap is vaai supported.

Do I need to install a qnap nas plugin (.vib) when yes whats the latest I only did find some post mention it but not the download link

I did install the QNAPvSpherePlugin, nothing happens ?!! Then I found QNAPvSpherePlugin_2_1_041 install nothing happens ?!
I found this what should be a plugin for webinterface QVWCPlugin_2.1.133 it installs but at the screen when you can fill in vcenter server + account both the fqdn and ip address fail cannot register it.

Did install QNAP_Snapshot_Agent_1_3_052 and it installs but at vcenter settings it does fail to connect.

Who has got the tools above working and on which vsphere server version.

User avatar
storageman
Experience counts
Posts: 4819
Joined: Thu Sep 22, 2011 10:57 pm

Re: QNAP with vsphere 6.5

Post by storageman » Thu Oct 11, 2018 9:05 pm

I would raise a ticket. Once again documentation sparse on the ground.
https://www.qnap.com/en/utilities/enterprise

clueless1
New here
Posts: 6
Joined: Tue Oct 09, 2018 1:49 am

Re: QNAP with vsphere 6.5

Post by clueless1 » Thu Oct 11, 2018 11:24 pm

I'm interested in knowing what is the advantage of ESXI to the NAS over iSCSI vs. NFS shares. In my VMWare farm all ESXI hosts are connected via 10gbit over a dedicated switch to the NAS using NFS and I'm very happy with that.
Beside that, I would open a ticket, too. That sounds like a broken plugin.

itognet
New here
Posts: 6
Joined: Sun Nov 11, 2018 2:37 am

Re: QNAP with vsphere 6.5

Post by itognet » Thu Nov 22, 2018 12:32 pm

Did you got answers from QNAP?

noodles_gb
Starting out
Posts: 26
Joined: Sun Apr 10, 2016 6:00 pm

Re: QNAP with vsphere 6.5

Post by noodles_gb » Thu May 09, 2019 3:54 pm

You only need the plugin for VAAI when using NFS. With iSCSI, providing your NAS supports it, VAAI should be enabled by default.

Check by one of two methods:

Go to host > configure > storage devices > select the QNAP device > check to see if Hardware Accelleration is supported.

Or use command line on a host:

Code: Select all

esxcli storage core device vaai status get
This is my QNAP:

Code: Select all

naa.6e843b6dcc1072bd6357d4eb6da4fedf
   VAAI Plugin Name:
   ATS Status: supported
   Clone Status: supported
   Zero Status: supported
   Delete Status: supported
More info here:

https://files.qnap.com/news/pressresour ... glish).pdf
VAAI for iSCSI supports 4 features
• Full copy (hardware-assisted copy)
• Block zeroing (hardware-assisted zeroing)
• Hardware-assisted locking
• Thin provisioning and space reclamation

VAAI for NAS (NFS) supports 3 features
• Full File Clone
• Space Reservation
• Extended Statistic

Post Reply

Return to “Server Virtualization & Clustering”