Windows Server 2019 Domain access Shares

Questions about using Windows AD service.
Post Reply
jcslim
New here
Posts: 3
Joined: Mon Dec 12, 2016 7:25 am

Windows Server 2019 Domain access Shares

Post by jcslim » Mon Sep 02, 2019 8:16 pm

Hi

I have a new Windows Server 2019 domain.

The server can see both of my NAS's in Network but cannot access them.

The error is
Windows cannot access \\NAS
Check the spelling of the name. Otherwise, there may be a problem with your network. Try to identify and resolve network problems, click diagnose

We get this from all of our workstations.

The only way around it so far has been to switch one of the computers from Domain type network to Private. Access then comes back. I'm assuming I'm missing something pretty obvious but any help would be much appreciated.

Thanks

J

User avatar
Toxic17
Ask me anything
Posts: 5154
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: Windows Server 2019 Domain access Shares

Post by Toxic17 » Mon Sep 02, 2019 9:02 pm

can you access a NAS share?

\\NAS\sharename ?

what share permissions do you have on the NAS? is the NAS joined to the domain?
Regards Simon

QTS 4.x User Guidex

QNAP Club Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


NAS: TS-473-32GB QM2-2P QXG-10G1T 4.4.1.1064 • TVS-463-16GB 4.4.1.1064 QM2-2S10G1TB • TS-459 Pro 2GB 4.2.6 • TS-121 4.3.3.0998 • APC Back-UPS ES 700G •
QPKG's: TwonkyServer 8.51 • Apache73 • QSonarr 3.0.1.503 • QNBZGet 21.0 • phpMyAdmin 4.9.0.1 • Qmono 5.20.1.19 • McAfee 2.2.1 • Lychee 3.2.15 • HBS 3.0.190802 • LEgo v3.0.0
Network: VM Hub 3.0 <500/35> • UniFi USG Pro 4 • UniFi USW-16-150W • UniFi USW-8-60W • UniFi CloudKey Gen2+• UniFi G3-Flex • UAP AC Pro • UAP AC Lite • SLM2008 • Dell 7050 MFF •

jcslim
New here
Posts: 3
Joined: Mon Dec 12, 2016 7:25 am

Re: Windows Server 2019 Domain access Shares

Post by jcslim » Mon Sep 02, 2019 9:05 pm

Hi Toxic

The Nas is not part of the domain I've never added it and its always worked fine.

I can see in Network the network PCs and the NAS (NAS) when I double click on it it won't show any of the shares.

The shares are set currently to guest full access until I can get this to work

Thanks

J

User avatar
Toxic17
Ask me anything
Posts: 5154
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: Windows Server 2019 Domain access Shares

Post by Toxic17 » Mon Sep 02, 2019 9:14 pm

what firmware version/build number are the NAS's on?

I know there are issues with 4.3.6.1040 and user should downgraded to 4.3.6.0993 if you are on that version?
Regards Simon

QTS 4.x User Guidex

QNAP Club Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


NAS: TS-473-32GB QM2-2P QXG-10G1T 4.4.1.1064 • TVS-463-16GB 4.4.1.1064 QM2-2S10G1TB • TS-459 Pro 2GB 4.2.6 • TS-121 4.3.3.0998 • APC Back-UPS ES 700G •
QPKG's: TwonkyServer 8.51 • Apache73 • QSonarr 3.0.1.503 • QNBZGet 21.0 • phpMyAdmin 4.9.0.1 • Qmono 5.20.1.19 • McAfee 2.2.1 • Lychee 3.2.15 • HBS 3.0.190802 • LEgo v3.0.0
Network: VM Hub 3.0 <500/35> • UniFi USG Pro 4 • UniFi USW-16-150W • UniFi USW-8-60W • UniFi CloudKey Gen2+• UniFi G3-Flex • UAP AC Pro • UAP AC Lite • SLM2008 • Dell 7050 MFF •

jcslim
New here
Posts: 3
Joined: Mon Dec 12, 2016 7:25 am

Re: Windows Server 2019 Domain access Shares

Post by jcslim » Mon Sep 02, 2019 9:48 pm

Hi Toxic

I'm running version 4.3.6.1040

Do I assume it is as easy to downgrade as to goto the below link and download the firmware and install it?

https://www.qnap.com/en/download?model= ... y=firmware

Thanks again

J

User avatar
Toxic17
Ask me anything
Posts: 5154
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: Windows Server 2019 Domain access Shares

Post by Toxic17 » Mon Sep 02, 2019 10:19 pm

yes fairly easy. just upload the image to the firmware update page in the control panel.

I usually also do a reboot before any firmware update/downgrade. also I think you also have to extract the image from the zip file then upload it.

you can also manually do it using the SSH method if you want to see the update procedure in a SSH window.

https://wiki.qnap.com/wiki/Manually_Updating_Firmware

I usually just download the zip file using wget command (in /share/Public folder), then unzip the image and run the manual procedure.
Regards Simon

QTS 4.x User Guidex

QNAP Club Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


NAS: TS-473-32GB QM2-2P QXG-10G1T 4.4.1.1064 • TVS-463-16GB 4.4.1.1064 QM2-2S10G1TB • TS-459 Pro 2GB 4.2.6 • TS-121 4.3.3.0998 • APC Back-UPS ES 700G •
QPKG's: TwonkyServer 8.51 • Apache73 • QSonarr 3.0.1.503 • QNBZGet 21.0 • phpMyAdmin 4.9.0.1 • Qmono 5.20.1.19 • McAfee 2.2.1 • Lychee 3.2.15 • HBS 3.0.190802 • LEgo v3.0.0
Network: VM Hub 3.0 <500/35> • UniFi USG Pro 4 • UniFi USW-16-150W • UniFi USW-8-60W • UniFi CloudKey Gen2+• UniFi G3-Flex • UAP AC Pro • UAP AC Lite • SLM2008 • Dell 7050 MFF •

Post Reply

Return to “Windows Domain & Active Directory”