Hi, I have a QNAP TS 470 Pro with firmware 4.3.3.0262 (date of firmware : 27/07/2017). My domain controller is a W2K8 Server. Unfortunately i cannot join the QNAP to my domain (xxxxxxxx.local). It always gave me these errors message : Microsoft network setting failded. Please check the DNS server, domain name, and username and password for logging in the domain. and in the system log : [Security mode] Failed to join domain. Check the AD Domain Member settings..
I can ping the QNAP in my network. Can someone help me please.
Can't join QNAP to domain
- storageman
- Ask me anything
- Posts: 5507
- Joined: Thu Sep 22, 2011 10:57 pm
Re: Can't join QNAP to domain
Are you double checking you are typing exactly as shown in netbios, it is case sensitive. Can you ping the domain controller in SSH?
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Can't join QNAP to domain
You might also try the newly released 4.3.3.0299 build as there were several AD related fixes in it.
See this post for details.
viewtopic.php?f=142&t=135500
See this post for details.
viewtopic.php?f=142&t=135500
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
-
- First post
- Posts: 1
- Joined: Sun Sep 17, 2017 6:01 pm
Re: Can't join QNAP to domain
Hi there,
Same issue when I try the manual mode.
In the wizard I get a different, detailed message: kinit(v5): Additional pre-authentication required while getting initial credentials
I have the build 0299 installed.
What I tried: Short domain admin password; remove complex password rules on AD; disable Microsoft network support.
DNS and NTP is pointing already to the AD server.
Any ideas?
Same issue when I try the manual mode.
In the wizard I get a different, detailed message: kinit(v5): Additional pre-authentication required while getting initial credentials
I have the build 0299 installed.
What I tried: Short domain admin password; remove complex password rules on AD; disable Microsoft network support.
DNS and NTP is pointing already to the AD server.
Any ideas?
-
- Starting out
- Posts: 24
- Joined: Wed Jul 26, 2017 2:58 am
Re: Can't join QNAP to domain
Hi all,
If your server had disable Smb1 support for wannaCry prevention.
You could be test enable temporary SMBv1 support by your AD. Join the domain and disable smbv1 after.
Gave you a link for ssh commanline
https://wiki.samba.org/index.php/Settin ... ain_Member
I hope this help you.
Kind regards
If your server had disable Smb1 support for wannaCry prevention.
You could be test enable temporary SMBv1 support by your AD. Join the domain and disable smbv1 after.
Gave you a link for ssh commanline
https://wiki.samba.org/index.php/Settin ... ain_Member
I hope this help you.
Kind regards