Page 1 of 1

High CPU usage when using QNAP domain controller

Posted: Sun Dec 09, 2018 6:27 pm
by grudi
Hi

Since I configured my qnap as domain controller I'm seeing a high CUP usage. It is using one core constantly. Anybody else having this problem?

Regards, grudi




Mem: 7001348K used, 8376888K free, 342200K shrd, 1081040K buff, 1035264K cached
CPU: 12.9% usr 19.1% sys 0.0% nic 66.5% idle 1.2% io 0.0% irq 0.0% sirq
Load average: 2.19 2.97 3.06 3/2290 27532
PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND
13599 1 admin R 87632 0.5 0 25.1 qooba --service gpo

Re: High CPU usage when using QNAP domain controller

Posted: Sat Dec 15, 2018 5:26 pm
by poulTS431
I have this process gone rouge as well.

Tried to contact support but no feedback yet.

Is this a QNAP specific process since I can't find any reference to it in any SAMBA documentation?

I have a TS431 with 2TB configured in RAID 1 so not a whole lot of RAM available.....

Re: High CPU usage when using QNAP domain controller

Posted: Sat Dec 15, 2018 11:54 pm
by dolbyman
seems ti be part of the gpo implementation

https://gist.github.com/pythoninthegras ... f523e6d5b4

Re: High CPU usage when using QNAP domain controller

Posted: Sun Dec 16, 2018 6:56 pm
by grudi
poulTS431 wrote: Sat Dec 15, 2018 5:26 pm I have this process gone rouge as well.

Tried to contact support but no feedback yet.

Is this a QNAP specific process since I can't find any reference to it in any SAMBA documentation?

I have a TS431 with 2TB configured in RAID 1 so not a whole lot of RAM available.....
I've contacted support too. They would like to have access to the NAS as admin which I'm reluctant to provide them.

Re: High CPU usage when using QNAP domain controller

Posted: Sun Dec 16, 2018 7:33 pm
by herbertvwright
Thanks for the tips

Re: High CPU usage when using QNAP domain controller

Posted: Sun Dec 16, 2018 11:24 pm
by dolbyman
herbertvwright wrote: Sun Dec 16, 2018 7:33 pm Thanks for the tips
not really any tips in here (so far)

Re: High CPU usage when using QNAP domain controller

Posted: Sun Jan 27, 2019 7:31 pm
by flodi
Hi,

same issue here. TS-451, latest firmware, 8GB ram.
Has anyone found a solution?

Re: High CPU usage when using QNAP domain controller

Posted: Sat Mar 02, 2019 7:01 pm
by grudi
Latest release 4.3.6.0867 has solved this issue